Answers Database


FLOORPLANNER-XACT: Unable to load fplan.pm occurs when opening the Floorplanner.


Record #921

Product Family: Hardware

Product Line: 5200

Product Part: 5200

Problem Title:
FLOORPLANNER-XACT: Unable to load fplan.pm occurs when opening the Floorplanner.


Problem Description:
Urgency: Low

hase is separated from the Placement.


Solution 1:


1) Floorplanner requires the .pm file for the 5200.

2) PPR generates the .pm file.

3) The .pm file will be deleted if you separate the mapping phase in the flow engine. This is of cou rse what most people do if they are likely to use the floorplanner which requires a map file!

4) You can force the .pm file to be saved by using /ppr/save_pm_file=true in an xactinit.dat file.

5) If you want to sent this control for the design you can do it by customising your implementation
template. But if you do that, then it is case sensitive and you must use; ppr save_pm_file=TRUE





End of Record #921 - Last Modified: 05/24/99 12:20

For the latest news, design tips, and patch information on the Xilinx design environment, check out the Technical Tips!