Answers Database


FPGA Configuration: Device seems to be in bypass mode and will not configure.


Record #2119

Product Family: Documentation

Product Line: FPGA Apps.

Product Part: Configuring FPGAs/Processorbus

Problem Title:
FPGA Configuration: Device seems to be in bypass mode and will not configure.


Problem Description:
URGENCY:
Standard

GENERAL PROBLEM DESCRIPTION:
Device(s) in daisy chain seems to be in bypass mode and will
not configure properly.

The device(s) having problem can be any where in the chain and
can be one or multiple devices within the chain. You may
noticed that configuration data going in at DIN is coming right
out from DOUT one cclk cycle later, indicating that the device
is already full when it has not been configured yet.



Solution 1:

Using logic analyzer or scope, check the signal on cclk near
the device having problem. A noise or ringing on cclk may be
the cause of this problem. In order to reduce the
noise/ringing, try adding 30-50 shunt capacitor on the cclk
line.

Also, refer to Configuration Guideline Application note in the PFGA Databook for more debugging tips
  related to configuration problem.




End of Record #2119 - Last Modified: 11/10/98 14:28

For the latest news, design tips, and patch information on the Xilinx design environment, check out the Technical Tips!