Answers Database


M1.3 JTAG Programmer: Output -> Cable Setup breaks cable connection


Record #2342

Product Family: Software

Product Line: CPLD Implementation

Product Part: jtagpgmr

Product Version: 1.3

Problem Title:
M1.3 JTAG Programmer: Output -> Cable Setup breaks cable connection


Problem Description:
Urgency: Standard

General Description:

If you select Cable Setup from the Output menu in the JTAG
Programmer software GUI, it will not be able to find the
connected cable, and will actually lose the connection of the
cable, even though connection may have already been
established.


Solution 1:

Return the JTAG Programmer to AUTO connect mode by selecting
Output->Reset Cable. You should now see the cable type shown
in the lower-right corner of the GUI.




End of Record #2342 - Last Modified: 10/04/97 14:12

For the latest news, design tips, and patch information on the Xilinx design environment, check out the Technical Tips!