Answers Database


Foundation F1.4: Project Manager slow to open in Windows NT


Record #3678

Product Family: Software

Product Line: Aldec

Product Part: Foundation Project Manager

Product Version: 1.4

Problem Title:
Foundation F1.4: Project Manager slow to open in Windows NT


Problem Description:
Urgency: Standard

General Description:

Under Windows NT, you may notice the Project Manager taking up
to 2-3 minutes to open after invoked. This has been seen to be
caused by an incompatible version of the Sentinel driver which
Foundation uses for the XVHDL keylock.


Solution 1:

To correct this problem, the current version of the Sentinel
driver must first be removed, and then an older, more
compatible version of the Sentinel driver may be installed.

1. First, remove the current Sentinel driver. To do this,
     go to the <ACTIVE>\DRIVERS\WIN_NT directory (where
     <ACTIVE> is the Foundation design entry install directory,
     typically C:\ACTIVE or C:\FNDTN\ACTIVE) in the Windows
     Explorer, and double-click on the program SETUPX86.EXE to
     invoke the Sentinel Setup program.

2. In the Sentinel Driver Setup Program window, select
     Functions->Remove Sentinel Driver.

**Note: If you are NOT using the Metamor XVHDL compiler for
your design, you may stop here. The Sentinel driver is only
required by the XVHDL compiler. Therefore, you do not need to
reinstall it if you are not using this VHDL compiler.

3. Next, install the Sentinel driver, ver 5.3. This version
     of the driver can be found on either the Foundation F1.3
     (note: F1.3, NOT F1.4) Design Entry Tools CDROM, or on the
     Xilinx Web site at:
     (ftp://ftp.xilinx.com/pub/swhelp/foundation/sent_53.zipInternet Link)

    3a. From the F1.3 CDROM, use the Explorer to go to the
      ACTIVE\DRIVERS\WIN_NT directory, and run the program
      SETUPX86.EXE.

    3b. From the SENT_53.ZIP file from the Web site, unzip the
      file, and then use the Explorer to go to the
      WIN_NT\ directory. Run the program SETUPX86.EXE.

4. This time, select Functions->Install Sentinel Driver.
     Verify that the path to the files is correct, and click OK.

5. Reboot the system.




End of Record #3678 - Last Modified: 03/23/98 16:20

For the latest news, design tips, and patch information on the Xilinx design environment, check out the Technical Tips!