Answers Database
M1.3/M1.4: Hitop hangs for 9500 design
Record #3720
Product Family: Software
Product Line: CPLD Implementation
Product Part: hitop
Product Version: 1.3
Problem Title:
M1.3/M1.4: Hitop hangs for 9500 design
Problem Description:
Keywork: hitop, hang
Urgency: HOT
General Description:
When implementing the design through it hangs during the following command: hitop -f ../xc9500.ngd
-d design -s -l design.log -o design
CR 103225
Solution 1:
Resolution:
For M1.3 -
There is no resolution other than upgrading to M1.4
For M1.4 -
Turn on the switch for Multi-Level Logic Optimization in the Implementation Option Template (this is
usually on by default)
NOTE: This is fixed in M1.5, where you don't need to turn on MULTI_LEVEL_LOGIC_OPT to get hitop to
complete, but you will still need it to get it to fit.
End of Record #3720 - Last Modified: 04/02/98 18:29 |
