Answers Database F1.5i_sp1: 9500XV auto-selection does not work automatically in current release Record #5685 Product Family: Hardware Product Line: 9500 Product Part: 9500 Problem Title: F1.5i_sp1: 9500XV auto-selection does not work automatically in current release Problem Description: Urgency: Standard General Description: When using the auto-selection for the 9500XV, the 9500XV family is not targetted automatically in the current version. Solution 1: When using the Foundation Schematic flow: 1. File -> Project Type 2. For the family select XC9500XL 3. For the part select the XC95*XV 4.Click Implementation -> Select the XC95*XV from the device pull-down (Step four is not automatically selected.) When using the Foundation HDL flow: 1. Click on the Synthesis button in the flow chart 2. Select the Target Device family as XC9500XL 3. Select the Target Device as XC9500XV and click Run 4. Go under the Versions Tab in the Foundation Project Manager 5. Right mouse click on the Ver - optimized 6. Select the "Target new device" 7. Select the XC95*XV family and click ok 8. Right mouse click on the rev and select the invoke interactive flow engine 9. Select the arrow to start the flow engine. End of Record #5685 - Last Modified: 04/20/99 13:56

For the latest news, design tips, and patch information on the Xilinx design environment, check out the Technical Tips!