Answers Database


FPGA Configuration: Express Mode fails (INIT Low) for XCS40XL.


Record #6252

Product Family: Hardware

Product Line: SpartanXL

Product Part: S40XL

Problem Title:
FPGA Configuration: Express Mode fails (INIT Low) for XCS40XL.


Problem Description:
Key Words: S40XL, SpartanXL, Express;

Urgency: Hot

General Description:

Express Mode configuration of XCS40XL (SpartanXL) fails with INIT going Low. This is a result of an
  issue in the Mask Layout of the S40XL and does not effect any other SpartanXL family members.


Solution 1:

A patch is now available to correct this problem:

ftp://ftp.xilinx.com/pub/swhelp/M1.5i_updates/15i_sp2_bitgen_sol.tar.gzInternet Link
ftp://ftp.xilinx.com/pub/swhelp/M1.5i_updates/15i_sp2_bitgen_hp.tar.gzInternet Link
ftp://ftp.xilinx.com/pub/swhelp/M1.5i_updates/15i_sp2_bitgen_pc.zipInternet Link

CAUTION: This FTP Update is intended as a fast response for the following
customer issue only. The risk inherent in this fast response is that there
is not enough time or resources available for the full regression testing
that is done for the Service Pack Updates and there is a higher risk of
introducing new problems. It is recommended that customers always install
the latest Service Pack Update, but only install FTP Updates when needed to
resolve specific issues.

NOTE: This FTP Update is only compatible with an A1.5i/F1.5i system that
have Service Pack 2 installed.




End of Record #6252 - Last Modified: 04/29/99 14:49

For the latest news, design tips, and patch information on the Xilinx design environment, check out the Technical Tips!