![]() |
|
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
|
![]() |
![]() |
Answers Database
XPLA PC-ISP Programmer: Software is used to program the CoolRunner ISP CPLDs.![]() Record #7585
Product Family: Software XPLA PC-ISP Programmer: Software is used to program the CoolRunner ISP CPLDs. Problem Description: Urgency: Standard General Description: What software do I use to program the CoolRunner ISP CPLDs? Solution 1: The CoolRunner ISP Software is called XPLA PC-ISP Programmer. This software provides the following features: Setup of JTAG Chain ---Allows up to 60 devices in chain. More than 5 need to be buffered. please see (Xilinx Solution 7569) regarding this issue. ---Supports non-CoolRunner CPLDs in the chain for bypass Port/Cable Setup ---Supports the Altera Byte Blaster cable, Xilinx JTAG ISP Download cable, or the CoolRunner download cable. ---Auto-detects which cable is being used. ATE Vector Generation ---Simplified binary file output for ISP programming of device by a microprocessor (Xilinx Solution 7577). Safe Programming Modes ---Warning window is displayed if a JEDEC is about to be downloaded with the ISP bit turned off. A customer can choose to cancel or continue the download . ---If any portion of the verify operation fails (during the integrated 'Program and Verify' command), the device is bulk-erased ---Checksum of the JEDEC being downloaded is calculated and compared to the written JEDEC End of Record #7585 - Last Modified: 10/11/99 16:36 |
For the latest news, design tips, and patch information on the Xilinx design environment, check out the Technical Tips! |
![]() | ![]() |