Return to the Products Page
  homesearchagentssupportask xilinxmap
Ask Sparty

What are the differences between the Spartan-II family and Spartan-XL family?

Introduction
Availability
Literature
Architecture
Software
Cores

The Spartan-II family is:

  • Based on a cost-optimized Virtex architecture, while the Spartan-XL family is based on the XC4000 architecture
  • Based on a 0.18u/0.22u, six layer metal (6LM) process vs. a 0.25u/0.35u, five layer metal (5LM) process for the Spartan-XL family
  • >3x density increase (from 40,000 to 150,000 system gates)
  • >1.5x speed grade performance (from 100MHz to 150+MHz)
  • 2-3x gates per I/O pin
  • 2x gates per dollar
  • 2x I/O performance
  • Operating voltage of 2.5V vs. 3.3V for the Spartan-XL family
  • Features an enhanced power-down with register preserve and status pin
  • Features dedicated Block SelectRAM in addition to distributed SelectRAM, while the Spartan-XL family only has distributed SelectRAM memory
  • Features dedicated DLLs for advanced clock control, while the Spartan-XL family does not
  • Available in fine pitch packages (FG256 and FG456)
Ask Sparty 013
Index
What's New
What's Popular
Spartan-II Family