Documents can be printed, as indicated in the following table:
|
Document to print |
From Project Manager |
From Schematic Editor |
From Part Editor |
From Text Window |
|
Single schematic page |
Yes |
Yes |
--- |
--- |
|
Multiple schematic pages |
Yes |
--- |
--- |
--- |
|
Entire schematic folder |
Yes |
--- |
--- |
--- |
|
Single part or symbol |
Yes |
--- |
Yes |
--- |
|
Multiple parts and symbols |
Yes |
--- |
Yes (a) |
--- |
|
Entire package |
Yes |
--- |
Yes (b) |
--- |
|
Text |
Yes (c) |
--- |
--- |
Yes |
(a) Multiple-part package in package view, only.
(b) In package view.
(c) Not including the session log.
To print a document
- In the Project manager, select the document to print
To print more than one document, use the Ctrl+click combination. - From the File menu, choose the Print command.
- Choose either to print the highlighted text or the entire document.
- Click OK.
The "Printing" message appears. Capture prints the window.
When printing a multi-page schematic, make sure that the pages do not have multiple Title Blocks with different page numbers. Otherwise, the pages will not be printed in the correct order. If you change the page numbers in the Title Blocks manually, then make sure that the Do not change the page number checkbox is checked in the .
To print from a text editor window
- Open the text editor window to print.
- From the File menu, choose Print.
- Choose either to print the highlighted text or the entire document.
- Click OK.
The "Printing" message appears. Capture prints the window.
Shortcut
Toolbar: 