Rotating objects

Capture objects can be rotated by 90-degree increments. Some objects, such as images, cannot be rotated.

To rotate objects

Select the objects.
From the Edit menu, choose the Rotate command. The selection set rotates 90 degrees counterclockwise. If the Rotate command does not appear on the Edit menu, the objects cannot be rotated.

The pin names and pin numbers on left and right side of a rotated part retain their default position. For example, if a pin name is above the pin before 180 degree rotation, pin name will be above the pin even after 180 degree rotation as Capture retains the default position after rotation.

Shortcut

Keyboard: R