Scaling a Print or Plot

You can manually scale or have Capture automatically scale prints and plots to fit the paper size you choose.

To scale a print or a plot of a schematic page or part

1. From the File menu, choose Print. The Print dialog box appears.
2. Select one of the three radio buttons in the Scale box.
   
   • The Auto scale option scales each schematic page to fit a single sheet of paper.
   • The Scale to page size option scales your schematic pages to the page size you select in the Scale to size box. This will result in multiple sheets of paper if you select a sheet size larger than your printer paper.
   • The Scale by factor option scales your schematic pages to a factor of your choice. The acceptance range of factors is 0.100 to 10.000.
3. If you select the Scale to sheet size option above, the Scale to size list becomes available. Your schematic page is scaled to the sheet size you select. This will result in multiple sheets of paper if you select a sheet size larger than your printer paper.
4. Click OK to send the image to the output device.

Shortcut

Toolbar: