We have seen five types of values---booleans, characters, integers, floating-point numbers and strings---but only four types of variables---bool, char, int and double. So far we have no way to store a string in a variable or perform operations on strings.
In fact, there are several kinds of variables in C++ that can store strings. One is a basic type that is part of the C++ language, sometimes called "a native C string." The syntax for C strings is a bit ugly, and using them requires some concepts we have not covered yet, so for the most part we are going to avoid them.
The string type we are going to use is called pstring, which is an open-source alternative to a type created specifically for the Computer Science AP Exam. The pclasses, as the entire group of open-source classes are called, can be found in the appendix section of this book. You can also visit their homepage at http://www.ibiblio.org/obp/pclasses/.
You might be wondering what is meant by class. It will be a few more chapters before I can give a complete definition, but for now a class is a collection of functions that defines the operations we can perform on some type. The pstring class contains all the functions that apply to pstrings.
Unfortunately, it is not possible to avoid C strings altogether. In a few places in this chapter I will warn you about some problems you might run into using pstrings instead of C strings.
You can create a variable with type pstring in the usual ways:
pstring first;The first line creates an pstring without giving it a value. The second line assigns it the string value "Hello." The third line is a combined declaration and assignment, also called an initialization.
Normally when string values like "Hello, " or "world." appear, they are treated as C strings. In this case, when we assign them to an pstring variable, they are converted automatically to pstring values.
We can output strings in the usual way:
cout << first << second << endl;In order to compile this code, you will have to include the header file for the pstring class, and you will have to add the file pstring.cpp to the list of files you want to compile. The details of how to do this depend on your programming environment.
Before proceeding, you should type in the program above and make sure you can compile and run it.
Strings are called "strings" because they are made up of a sequence, or string, of characters. The first operation we are going to perform on a string is to extract one of the characters. C++ uses square brackets ([ and ]) for this operation:
pstring fruit = "banana";The expression fruit[1] indicates that I want character number 1 from the string named fruit. The result is stored in a char named letter. When I output the value of letter, I get a surprise:
aa is not the first letter of "banana". Unless you are a computer scientist. For perverse reasons, computer scientists always start counting from zero. The 0th letter ("zeroeth") of "banana" is b. The 1th letter ("oneth") is a and the 2th ("twoeth") letter is n.
If you want the the zereoth letter of a string, you have to put zero in the square brackets:
char letter = fruit[0];To find the length of a string (number of characters), we can use the length function. The syntax for calling this function is a little different from what we've seen before:
int length;To describe this function call, we would say that we are invoking the length function on the string named fruit. This vocabulary may seem strange, but we will see many more examples where we invoke a function on an object. The syntax for function invocation is called "dot notation," because the dot (period) separates the name of the object, fruit, from the name of the function, length.
length takes no arguments, as indicated by the empty parentheses (). The return value is an integer, in this case 6. Notice that it is legal to have a variable with the same name as a function.
To find the last letter of a string, you might be tempted to try something like
int length = fruit.length();That won't work. The reason is that there is no 6th letter in "banana". Since we started counting at 0, the 6 letters are numbered from 0 to 5. To get the last character, you have to subtract 1 from length.
int length = fruit.length();A common thing to do with a string is start at the beginning, select each character in turn, do something to it, and continue until the end. This pattern of processing is called a traversal. A natural way to encode a traversal is with a while statement:
int index = 0;This loop traverses the string and outputs each letter on a line by itself. Notice that the condition is index < fruit.length(), which means that when index is equal to the length of the string, the condition is false and the body of the loop is not executed. The last character we access is the one with the index fruit.length()-1.
The name of the loop variable is index. An index is a variable or value used to specify one member of an ordered set, in this case the set of characters in the string. The index indicates (hence the name) which one you want. The set has to be ordered so that each letter has an index and each index refers to a single character.
As an exercise, write a function that takes an pstring as an argument and that outputs the letters backwards, all on one line.
Way back in Section 1.3 I talked about run-time errors, which are errors that don't appear until a program has started running.
So far, you probably haven't seen many run-time errors, because we haven't been doing many things that can cause one. Well, now we are. If you use the [] operator and you provide an index that is negative or greater than length-1, you will get a run-time error and a message something like this:
index out of range: 6, string: bananaTry it in your development environment and see how it looks.
The pstring class provides several other functions that you can invoke on strings. The find function is like the opposite the [] operator. Instead of taking an index and extracting the character at that index, find takes a character and finds the index where that character appears.
pstring fruit = "banana";This example finds the index of the letter 'a' in the string. In this case, the letter appears three times, so it is not obvious what find should do. According to the documentation, it returns the index of the first appearance, so the result is 1. If the given letter does not appear in the string, find returns -1.
In addition, there is a version of find that takes another pstring as an argument and that finds the index where the substring appears in the string. For example,
pstring fruit = "banana";This example returns the value 2.
You should remember from Section 5.4 that there can be more than one function with the same name, as long as they take a different number of parameters or different types. In this case, C++ knows which version of find to invoke by looking at the type of the argument we provide.
If we are looking for a letter in an pstring, we may not want to start at the beginning of the string. One way to generalize the find function is to write a version that takes an additional parameter---the index where we should start looking. Here is an implementation of this function.
int find (pstring s, char c, int i)Instead of invoking this function on an pstring, like the first version of find, we have to pass the pstring as the first argument. The other arguments are the character we are looking for and the index where we should start.
The following program counts the number of times the letter 'a' appears in a string:
pstring fruit = "banana";This program demonstrates a common idiom, called a counter. The variable count is initialized to zero and then incremented each time we find an 'a'. (To increment is to increase by one; it is the opposite of decrement, and unrelated to excrement, which is a noun.) When we exit the loop, count contains the result: the total number of a's.
As an exercise, encapsulate this code in a function named countLetters, and generalize it so that it accepts the string and the letter as arguments.
As a second exercise, rewrite this function so that instead of traversing the string, it uses the version of find we wrote in the previous section.
Incrementing and decrementing are such common operations that C++ provides special operators for them. The ++ operator adds one to the current value of an int, char or double, and -- subtracts one. Neither operator works on pstrings, and neither should be used on bools.
Technically, it is legal to increment a variable and use it in an expression at the same time. For example, you might see something like:
cout << i++ << endl;Looking at this, it is not clear whether the increment will take effect before or after the value is displayed. Because expressions like this tend to be confusing, I would discourage you from using them. In fact, to discourage you even more, I'm not going to tell you what the result is. If you really want to know, you can try it.
Using the increment operators, we can rewrite the letter-counter:
int index = 0;It is a common error to write something like
index = index++; // WRONG!!Unfortunately, this is syntactically legal, so the compiler will not warn you. The effect of this statement is to leave the value of index unchanged. This is often a difficult bug to track down.
Remember, you can write index = index +1;, or you can write index++;, but you shouldn't mix them.
Interestingly, the + operator can be used on strings; it performs string concatenation. To concatenate means to join the two operands end to end. For example:
pstring fruit = "banana";The output of this program is banana nut bread.
Unfortunately, the + operator does not work on native C strings, so you cannot write something like
pstring dessert = "banana" + " nut bread";because both operands are C strings. As long as one of the operands is an pstring, though, C++ will automatically convert the other.
It is also possible to concatenate a character onto the beginning or end of an pstring. In the following example, we will use concatenation and character arithmetic to output an abecedarian series.
"Abecedarian" refers to a series or list in which the elements appear in alphabetical order. For example, in Robert McCloskey's book Make Way for Ducklings, the names of the ducklings are Jack, Kack, Lack, Mack, Nack, Ouack, Pack and Quack. Here is a loop that outputs these names in order:
pstring suffix = "ack";The output of this program is:
JackOf course, that's not quite right because I've misspelled "Ouack" and "Quack." As an exercise, modify the program to correct this error.
Again, be careful to use string concatenation only with pstrings and not with native C strings. Unfortunately, an expression like letter + "ack" is syntactically legal in C++, although it produces a very strange result, at least in my development environment.
You can change the letters in an pstring one at a time using the [] operator on the left side of an assignment. For example,
pstring greeting = "Hello, world!";produces the output Jello, world!.
All the comparison operators that work on ints and doubles also work on pstrings. For example, if you want to know if two strings are equal:
if (word == "banana") {The other comparison operations are useful for putting words in alphabetical order.
if (word < "banana") {You should be aware, though, that the pstring class does not handle upper and lower case letters the same way that people do. All the upper case letters come before all the lower case letters. As a result,
Your word, Zebra, comes before banana.A common way to address this problem is to convert strings to a standard format, like all lower-case, before performing the comparison. The next sections explains how. I will not address the more difficult problem, which is making the program realize that zebras are not fruit.
It is often useful to examine a character and test whether it is upper or lower case, or whether it is a character or a digit. C++ provides a library of functions that perform this kind of character classification. In order to use these functions, you have to include the header file ctype.h.
char letter = 'a';You might expect the return value from isalpha to be a bool, but for reasons I don't even want to think about, it is actually an integer that is 0 if the argument is not a letter, and some non-zero value if it is.
This oddity is not as inconvenient as it seems, because it is legal to use this kind of integer in a conditional, as shown in the example. The value 0 is treated as false, and all non-zero values are treated as true.
Technically, this sort of thing should not be allowed---integers are not the same thing as boolean values. Nevertheless, the C++ habit of converting automatically between types can be useful.
Other character classification functions include isdigit, which identifies the digits 0 through 9, and isspace, which identifies all kinds of "white" space, including spaces, tabs, newlines, and a few others. There are also isupper and islower, which distinguish upper and lower case letters.
Finally, there are two functions that convert letters from one case to the other, called toupper and tolower. Both take a single character as a parameter and return a (possibly converted) character.
char letter = 'a';The output of this code is A.
As an exercise, use the character classification and conversion library to write functions named pstringToUpper and pstringToLower that take a single pstring as a parameter, and that modify the string by converting all the letters to upper or lower case. The return type should be void.
This chapter does not cover all the pstring functions. Two additional ones, c_str and substr, are covered in Section 23.2 and Section 23.4.