Section 3.6
The switch Statement
The second branching statement in Java is the switch statement, which is introduced in this section. The switch statement is used far less often than the if statement, but it is sometimes useful for expressing a certain type of multi-way branch.
3.6.1 The Basic switch Statement
A switch statement allows you to test the value of an expression and, depending on that value, to jump directly to some location within the switch statement. Only expressions of certain types can be used. The value of the expression can be one of the primitive integer types int, short, or byte. It can be the primitive char type. Or, as we will see later in this section, it can be an enumuerated type. In particular, the expression cannot be a String or a real number. The positions that you can jump to are marked with case labels that take the form: "case constant:". This marks the position the computer jumps to when the expression evaluates to the given constant. As the final case in a switch statement you can, optionally, use the label "default:", which provides a default jump point that is used when the value of the expression is not listed in any case label.
A switch statement, as it is most oftern used, has the form:
switch (expression) { case constant-1: statements-1 break; case constant-2: statements-2 break; . . // (more cases) . case constant-N: statements-N break; default: // optional default case statements-(N+1) } // end of switch statement
The break statements are technically optional. The effect of a break is to make the computer jump to the end of the switch statement. If you leave out the break statement, the computer will just forge ahead after completing one case and will execute the statements associated with the next case label. This is rarely what you want, but it is legal. (I will note here -- although you won't understand it until you get to the next chapter -- that inside a subroutine, the break statement is sometimes replaced by a return statement.)
Note that you can leave out one of the groups of statements entirely (including the break). You then have two case labels in a row, containing two different constants. This just means that the computer will jump to the same place and perform the same action for each of the two constants.
Here is an example of a switch statement. This is not a useful example, but it should be easy for you to follow. Note, by the way, that the constants in the case labels don't have to be in any particular order, as long as they are all different:
switch ( N ) { // (Assume N is an integer variable.)
case 1:
System.out.println("The number is 1.");
break;
case 2:
case 4:
case 8:
System.out.println("The number is 2, 4, or 8.");
System.out.println("(That's a power of 2!)");
break;
case 3:
case 6:
case 9:
System.out.println("The number is 3, 6, or 9.");
System.out.println("(That's a multiple of 3!)");
break;
case 5:
System.out.println("The number is 5.");
break;
default:
System.out.println("The number is 7 or is outside the range 1 to 9.");
}
The switch statement is pretty primitive as control structures go, and it's easy to make mistakes when you use it. Java takes all its control structures directly from the older programming languages C and C++. The switch statement is certainly one place where the designers of Java should have introduced some improvements.
3.6.2 Menus and switch Statements
One application of switch statements is in processing menus. A menu is a list of options. The user selects one of the options. The computer has to respond to each possible choice in a different way. If the options are numbered 1, 2, ..., then the number of the chosen option can be used in a switch statement to select the proper response.
In a TextIO-based program, the menu can be presented as a numbered list of options, and the user can choose an option by typing in its number. Here is an example that could be used in a variation of the LengthConverter example from the previous section:
int optionNumber; // Option number from menu, selected by user.
double measurement; // A numerical measurement, input by the user.
// The unit of measurement depends on which
// option the user has selected.
double inches; // The same measurement, converted into inches.
/* Display menu and get user's selected option number. */
TextIO.putln("What unit of measurement does your input use?");
TextIO.putln();
TextIO.putln(" 1. inches");
TextIO.putln(" 2. feet");
TextIO.putln(" 3. yards");
TextIO.putln(" 4. miles");
TextIO.putln();
TextIO.putln("Enter the number of your choice: ");
optionNumber = TextIO.getlnInt();
/* Read user's measurement and convert to inches. */
switch ( optionNumber ) {
case 1:
TextIO.putln("Enter the number of inches: );
measurement = TextIO.getlnDouble();
inches = measurement;
break;
case 2:
TextIO.putln("Enter the number of feet: );
measurement = TextIO.getlnDouble();
inches = measurement * 12;
break;
case 3:
TextIO.putln("Enter the number of yards: );
measurement = TextIO.getlnDouble();
inches = measurement * 36;
break;
case 4:
TextIO.putln("Enter the number of miles: );
measurement = TextIO.getlnDouble();
inches = measurement * 12 * 5280;
break;
default:
TextIO.putln("Error! Illegal option number! I quit!");
System.exit(1);
} // end switch
/* Now go on to convert inches to feet, yards, and miles... */
3.6.3 Enums in switch Statements
The type of the expression in a switch can be an enumerated type. In that case, the constants in the case labels must be values from the enumerated type. For example, if the type of the expression is the enumerated type Season defined by
enum Season { SPRING, SUMMER, FALL, WINTER }
Then the constants in the case label must be chosen from among the values Season.SPRING, Season.SUMMER, Season.FALL, or Season.WINTER. However, there is another quirk in the syntax: when an enum constant is used in a case label, only the simple name, such as "SPRING" can be used, not the full name "Season.SPRING". Of course, the computer already knows that the value in the case label must belong to the enumerated type, since it can tell that from the type of expression used, so there is really no need to specify the type name in the constant. As an example, suppose that currentSeason is a variable of type Season. Then we could have the switch statement:
switch ( currentSeason ) {
case WINTER: // ( NOT Season.WINTER ! )
System.out.println("December, January, February");
break;
case SPRING:
System.out.println("March, April, May");
break;
case SUMMER:
System.out.println("June, July, August");
break;
case FALL:
System.out.println("September, October, November");
break;
}
3.6.4 Definite Assignment
As a somwhat more realistic example, the following switch statement makes a random choice among three possible alternatives. Recall that the value of the expression (int)(3*Math.random()) is one of the integers 0, 1, or 2, selected at random with equal probability, so the switch statement below will assign one of the values "Rock", "Scissors", "Paper" to computerMove, with probability 1/3 for each case. Although the switch statement in this example is correct, this code segment as a whole illustrates a subtle syntax error that sometimes comes up:
String computerMove;
switch ( (int)(3*Math.random()) ) {
case 0:
computerMove = "Rock";
break;
case 1:
computerMove = "Scissors";
break;
case 2:
computerMove = "Paper";
break;
}
System.out.println("Computer's move is " + computerMove);
You probably haven't spotted the error, since it's not an error from a human point of view. The computer reports the last line to be an error, because the variable computerMove might not have been assigned a value. In Java, it is only legal to use the value of a variable if a value has already benn definitely assigned to that variable. The means that the computer must be able to prove, just from looking at the code when the program is compiled, that the variable must have been assigned a value. Unfortunately, the computer only has a few simple rules that it can apply to make the determination. In this case, it sees a switch statement in which the type of expression is int and in which the cases that are covered are 0, 1, and 2. For other values of the expression, computerMove is never assigned a value. So, the computer thinks computerMove might still be undefined after the switch statement. Now, in fact, this isn't true: 0, 1, and 2 are actually the only possible values of the expression (int)(3*Math.random()), but the computer isn't smart enough to figure that out. The easiest way to fix the problem is to replace the case label case 2 with default. The the computer can see that a value is assigned to compuerMove in all cases.
More generally, we say that a value has been definitely assigned to a variable at a given point in a program if every execution path leading from the declaration of the variable to that point in the code includes an assignment to the variable. This rule takes into account loops and if statements as well as switch statements. For example, the following two if statements both do the same thing as the switch statement given above, but only the one on the right definitely assigns a value to computerMove:
String computerMove; String computerMove;
int rand; int rand;
rand = (int)(3*Math.random()); rand = (int)(3*Math.random());
if ( rand == 0 ) if ( rand == 0 )
computerMove = "Rock"; computerMove = "Rock";
else if ( rand == 1 ) else if ( rand == 1 )
computerMove = "Scissors"; computerMove = "Scissors";
else if ( rand == 2 ) else
computerMove = "Paper"; computerMove = "Paper";
In the code on the left, the test "if ( rand == 2 )" in the final else clause is unnecessary because if rand is not 0 or 1, the only remaining possibility is that rand == 2. The computer, however, can't figure that out.