Peter, For the VHPI I loaded their file into excel, added the responses, and uploaded it to their site. I found excel to be a poor editor so I started with a text file and pasted them into excel. At the time it was an relatively easy process. Best, Jim ------Original Message------ From: Peter J. Ashenden Sender: owner-isac@server.eda.org To: isac@server.eda.org Sent: Jul 12, 2008 1:40 PM Subject: Preparing ballot responses for P1076 Folks, I'm about to prepare draft ballot responses for the P1076 ballot. FYI, the IEEE standards website has information on the process at: http://standards.ieee.org/guides/companion/part2.html#resolution http://standards.ieee.org/guides/companion/annexb-c.html#top If you have a moment, might be worth looking at this so we all know what the IEEE's expectations are. Cheers, PA -- Dr. Peter J. Ashenden peter@ashenden.com.au Ashenden Designs Pty. Ltd. www.ashenden.com.au PO Box 640 VoIP: sip://0871270078@sip.internode.on.net Stirling, SA 5152 Phone: +61 8 7127 0078 Australia Mobile: +61 414 70 9106 -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ~~~~~~~~~~~~~ Jim Lewis SynthWorks VHDL Training-- This message has been scanned for viruses anddangerous content by MailScanner, and isbelieved to be clean.Received on Sat Jul 12 04:13:12 2008
This archive was generated by hypermail 2.1.8 : Sat Jul 12 2008 - 04:13:13 PDT