Re: Revision 1.12 of pipes section of working document

Here's the compressed .zip of the new Word doc.
Hope this works !

-- johnS

John Stickley wrote:
> Greetings ITC Techies,
> 
> I've completed a number of updates to the pipes chapter of
> Brian's newly re-organized working document.
> 
> I will send Brian the updated word document which he can
> post on the web site. I will also attempt to send it to
> the reflector in a separate e-mailing as a compressed .zip
> file (but results not guaranteed !).
> 
> All changes since the last FrameMaker version of this document
> (revision 1.11) have been shown with Word tracking highlights.
> 
> Here's a summary of my updates:
> 
> - Clean up formating from Brian's conversion from FrameMaker
>   (there were a lot of polluted formats that needed to be removed).
> 
> - I have incorporated the changes to restrict the pipe_id
>   space by allowing to be a user specifiable static value on
>   the hardware side as described in this e-mail:
> 
>     http://www.verilog.org/itc/hm/0920.html
> 
>   This will allow tighter control of pipe ID values - a
>   concern raised by Jason.
> 
> - Separated out section on flushing semantics, eom auto-flush.
>   Added clarifications from Shabtay's object pipes proposal.
> 
> - Added a number of minor corrections
> 
> -- johnS
> 
> This email may contain material that is confidential, privileged
> and/or attorney work product for the sole use of the intended
> recipient.  Any review, reliance or distribution by others or
> forwarding without express permission        /\
> is strictly prohibited. If you are     /\   |  \
> not the intended recipient please     |  \ /   |
> contact the sender and delete        /    \     \
> all copies.                      /\_/  K2  \_    \_
> ______________________________/\/            \     \
> John Stickley                   \             \     \
> Mgr., Acceleration Methodologies \             \________________
> Mentor Graphics - MED             \_
> 17 E. Cedar Place                   \   john_stickley@mentor.com
> Ramsey, NJ  07446                    \     Phone: (201) 818-2585
> ________________________________________________________________
> 
> 


-- 

This email may contain material that is confidential, privileged
and/or attorney work product for the sole use of the intended
recipient.  Any review, reliance or distribution by others or
forwarding without express permission        /\
is strictly prohibited. If you are     /\   |  \
not the intended recipient please     |  \ /   |
contact the sender and delete        /    \     \
all copies.                      /\_/  K2  \_    \_
______________________________/\/            \     \
John Stickley                   \             \     \
Mgr., Acceleration Methodologies \             \________________
Mentor Graphics - MED             \_
17 E. Cedar Place                   \   john_stickley@mentor.com
Ramsey, NJ  07446                    \     Phone: (201) 818-2585
________________________________________________________________