Subject: Re: Dynamic/Global Parameters in Verilog-AMS
From: Steve Hamm (Steve.Hamm@motorola.com)
Date: Sun Mar 04 2001 - 07:49:42 PST
---"Kevin" == Kevin Cameron x3251 <Kevin.Cameron@nsc.com> writes:
Kevin> You said wanted the ability to alter parameters, and that that
Kevin> functionality was for sweeping in different analyses. The
Kevin> general attribute scheme should allow you to add attributes
Kevin> indicating that a parameter is sweepable and whether the change
Kevin> should propagate, ranges for parameters are already
Kevin> permitted.
I'm completely missing the reasoning here. Why is any change to the
language necessary for this functionality?
We have implemented the ability to change and sweep parameters; it is
handled outside Verilog-A(MS) in the simulation controls, which is
where I believe it belongs.
--Steve
Steve.Hamm@motorola.com ----- Motorola Inc. Circuit Simulation Group
---- TX32 PL29, 7700 W. Parmer Lane, Austin TX 78729 ----
This archive was generated by hypermail 2b28 : Sun Mar 04 2001 - 07:50:53 PST