The doc is now on eda.org: http://www.eda.org/verilog-ams/htmlpages/public-docs/table_model_1.pdf along with the other document: http://www.eda.org/verilog-ams/htmlpages/public-docs/table_model_LRM_23_definition.pdf -Geoffrey Patrick O'Halloran wrote: > > Hi, > > The new text for $table_model in 2.3 is available at this temporary location > > www.tiburon-da.com/lrm-docs/table_model_1.pdf > > Geoffrey will upload the file to the usual location but probably not before > the meeting tomorrow. Some diagrams need to be filled out and a couple more > examples are needed but otherwise it's complete. > > The quick overview - $table_model now supports: > > - linear, quadratic, cubic splines, and a local cubic interpolator for all > dimensions > - exact and closest lookup modes > - constant extrapolation > - multiple dependents > - ability to ignore input columns > - doc on isolines in order that all of the above make sense > > A typical control string might look like this, > > $table_model(filename, V(1),..., "I, 1LC, 3LL;1"); > > That means "Ignore column 1, use linear and constant extrapolation on the > outer dimension of the data, use cubic splines on the inner dimension with > linear extrapolation on both ends. Do this interpolation for the third > dependent variable in the file." > > Regards, > Patrick -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.Received on Thu Jun 14 05:08:59 2007
This archive was generated by hypermail 2.1.8 : Thu Jun 14 2007 - 05:10:34 PDT