RE: No BNF support for .module_output_variable_identifier

Hi,

If your question is that the BNF does not seem to allow the form " . identifier " by itself in an expression, then I also do not see it in the BNF.

Shalom 

> -----Original Message-----
> From: owner-verilog-ams@server.eda.org 
> [mailto:owner-verilog-ams@server.eda.org] On Behalf Of Surya 
> Pratik Saha
> Sent: Monday, August 03, 2009 10:56 AM
> To: verilog-ams@server.eda.org
> Subject: No BNF support for .module_output_variable_identifier
> 
> Hi,
> In Verilog AMS 2.3.1, section 6.4.3 Paramset output 
> variables, there is
> an example of ".module_output_variable_identifier". But I 
> could not see
> this in the BNF of paramset. Is it intentional or a oversight of LRM?
> 
> -- 
> Regards
> Surya
---------------------------------------------------------------------
Intel Israel (74) Limited

This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.