Answers Database NGD2VER: Using the -ism to embed simulation models into the Verilog simulation netlist Record #4098 Product Family: Software Product Line: FPGA Implementation Product Part: ngd2ver Product Version: 2.1is1 Problem Title: NGD2VER: Using the -ism to embed simulation models into the Verilog simulation netlist Problem Description: Urgency: Standard General Description: A new switch was added to the Alliance 1.5 version of NGD2VER, the Verilog simulation netlister, in order to automatically embed the simulation models into the netlist. This will allow for an easier simulation flow by not having to pre-compile the SIMPRIM libraries at the expense of a slightly longer compilation time of the netlist. Solution 1: This new switch is the -ism switch. In order to invoke this from command-line, simply specify it when executing Ngd2ver: ngd2ver -ism <design>.nga In order to use this switch with the Design Manager, the switch must be added to the Custom Template from the Template Manager. See (Xilinx Solution 1227) for details on adding custom switches to the Design Manager. End of Record #4098 - Last Modified: 12/22/99 14:41

For the latest news, design tips, and patch information on the Xilinx design environment, check out the Technical Tips!