Internet Draft Definitions of Managed Objects for the Multiprotocol Label Switching, Label Distribution Protocol (LDP) August 1998 <draft-ietf-mpls-ldp-mib-00.txt> Joan Cucchiara Bay Networks joanc@baynetworks.com Hans Sjostrand Ericsson hans.sjostrand@etx.ericsson.se James V. Luciani Bay Networks luciani@baynetworks.com Status of this Memo This document is an Internet-Draft. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its Areas, and its Working Groups. Note that other groups may also distribute working documents as Internet-Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as a "work in progress". To view the entire list of current Internet-Drafts, please check the "1id-abstracts.txt" listing contained in the Internet-Drafts Shadow Directories on ftp.is.co.za (Africa), ftp.nordu.net (Northern Europe), ftp.nis.garr.it (Southern Europe), munnari.oz.au (Pacific Rim), ftp.ietf.org (US East Coast), or ftp.isi.edu (US West Coast). Copyright Notice Copyright (C) The Internet Society (1998). All Rights Reserved. INTERNET-DRAFT MPLS LDP MIB August 1998 Abstract This memo defines an experimental portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for the Multiprotocol Label Switching, Label Distribution Protocol (LDP) as defined in [17]. This memo does not specify a standard for the Internet community. 1. The SNMP Management Framework The SNMP Management Framework presently consists of five major components: o An overall architecture, described in RFC 2271 [1]. o Mechanisms for describing and naming objects and events for the purpose of management. The first version of this Structure of Management Information (SMI) is called SMIv1 and described in RFC 1155 [2], RFC 1212 [3] and RFC 1215 [4]. The second version, called SMIv2, is described in RFC 1902 [5], RFC 1903 [6] and RFC 1904 [7]. o Message protocols for transferring management information. The first version of the SNMP message protocol is called SNMPv1 and described in RFC 1157 [8]. A second version of the SNMP message protocol, which is not an Internet standards track protocol, is called SNMPv2c and described in RFC 1901 [9] and RFC 1906 [10]. The third version of the message protocol is called SNMPv3 and described in RFC 1906 [10], RFC 2272 [11] and RFC 2274 [12]. o Protocol operations for accessing management information. The first set of protocol operations and associated PDU formats is described in RFC 1157 [8]. A second set of protocol operations and associated PDU formats is described in RFC 1905 [13]. o A set of fundamental applications described in RFC 2273 [14] and the view-based access control mechanism described in RFC 2275 [15]. Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. Objects in the MIB are defined using the mechanisms defined in the SMI. This memo specifies a MIB module that is compliant to the SMIv2. A Expires February 1999 [Page 2] INTERNET-DRAFT MPLS LDP MIB August 1998 MIB conforming to the SMIv1 can be produced through the appropriate translations. The resulting translated MIB must be semantically equivalent, except where objects or events are omitted because no translation is possible (use of Counter64). Some machine readable information in SMIv2 will be converted into textual descriptions in SMIv1 during the translation process. However, this loss of machine readable information is not considered to change the semantics of the MIB. 1.1. Object Definitions Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. Objects in the MIB are defined using the subset of Abstract Syntax Notation One (ASN.1) defined in the SMI. In particular, each object type is named by an OBJECT IDENTIFIER, an administratively assigned name. The object type together with an object instance serves to uniquely identify a specific instantiation of the object. For human convenience, we often use a textual string, termed the descriptor, to also refer to the object type. Expires February 1999 [Page 3] INTERNET-DRAFT MPLS LDP MIB August 1998 2. Structure of the MIB The following aspects are not addressed in this document: Interfaces with respect to the IFMIB (e.g. is ldp an interface in the sense of being stacked onto of the data link layer, and its relationship to the network layer), VPN issues (i.e. potential MIB objects such as the VPN Identifier are not included at this time), and lastly, multicast issues are not discussed. Some of these issues need further clarification before adding to this MIB. Currently, there is two groups. The MPLS LDP General Group and the MPLS LDP Notifications Group. 2.1. The MPLS LDP General Group This group contains information about the specific LDP Entities which are associated with this agent. Each LSR must have one LDP Entity. 2.1.1. The Label Distribution Protocol's Entity Table The LDP Entity Table represents the LDP Entities which exist on a single Label Switch Router (LSR). The LDP Entity performs the LDP protocol. There must be at least one LDP Entity for the LSR to support LDP. Each entry/row in this table represents a single LDP Entity. 2.1.2. The Label Distribution Protocol's Entity Statistics Table The LDP Entity Statistics Table will maintain counters related to an LDP Entity. This Table should be a read-only table which contains statistical information. Each row in this table will be related to a single LDP Entity. 2.1.3. The LDP Peer Table The LDP Peer Table contains information about LDP Peers. Each row in this table represents an LDP Peer which is known to an LDP Entity. Expires February 1999 [Page 4] INTERNET-DRAFT MPLS LDP MIB August 1998 2.1.4. The LDP Sessions Table Each entry in this table represents a session between an LDP Entity and a Peer. 2.1.5. The LDP Adjacencies Table This is a table of all adjacencies between all LPD Entities and all LDP Peers. A Session may have one or more adjacencies. 2.1.6. The LDP Label Information Base (LIB) Table TBD. Some potential objects: incoming label, outgoing label, and the mid. 2.2. The LDP Notifications Group 2.2.1. LDP Notifications Currently, there is one notification which will be sent when an LDP attempts to initialize the same session beyond the configured threshold. 3. MPLS Label Distribution Protocol MIB Definitions MPLS-LDP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, experimental, Integer32, Counter32, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION, TruthValue, RowStatus, TimeInterval FROM SNMPv2-TC ; Expires February 1999 [Page 5] INTERNET-DRAFT MPLS LDP MIB August 1998 mplsLdpMIB MODULE-IDENTITY LAST-UPDATED "9808261200Z" -- August 26, 1998 ORGANIZATION "Multiprotocol Label Switching (mpls) Working Group" CONTACT-INFO "Joan Cucchiara (joanc@baynetworks.com) Bay Networks Hans Sjostrand (hans.sjostrand@etx.ericsson.se) Ericsson James V. Luciani (luciani@baynetworks.com) Bay Networks" DESCRIPTION "This MIB contains managed object definitions for the Multiprotocol Label Switching, Label Distribution Protocol, LDP, as defined in draft-ietf-mpls-ldp-01.txt." ::= { experimental 9876 } -- to be assigned --******************************************************************** -- MPLS LDP Textual Conventions --******************************************************************** MplsLdpIANAAddrFamily ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An address family. Values are defined in Assigned Numbers, RFC1700. Note that not all these values make sense in all contexts where this type is used in this MIB, but they are included for completeness." REFERENCE "Assigned Numbers, RFC1700, ADDRESS FAMILY NUMBERS" SYNTAX INTEGER { other(0), ipV4(1), ipV6(2), nsap(3), hdlc(4), bbn1822(5), ieee802(6), e163(7), e164(8), f69(9), x121(10), ipx(11), appleTalk(12), decnetIV(13), banyanVines(14), Expires February 1999 [Page 6] INTERNET-DRAFT MPLS LDP MIB August 1998 e164WithNsap(15) } MplsLdpGenAddr ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The value of an network layer or data link layer address." SYNTAX OCTET STRING (SIZE (0..60)) AtmVpIdentifier ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The VPI value for a VPL. The value VPI=0 is not used for a VPL not associated with a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 1 to 255. For ATM UNIs supporting VCCs the VPI value ranges from 0 to 255. The maximum VPI value cannot exceed the value allowable by atmInterfaceMaxVpiBits defined in ATM-MIB." SYNTAX Unsigned32 (0..4095) AtmVcIdentifier ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The VCI value for a VCL. The maximum VCI value cannot exceed the value allowable by atmInterfaceMaxVciBits defined in ATM-MIB." SYNTAX Unsigned32 (0..65535) -- Top-level structure of the MIB mplsLdpObjects OBJECT IDENTIFIER ::= { mplsLdpMIB 1 } mplsLdpNotifications OBJECT IDENTIFIER ::= { mplsLdpMIB 2 } mplsLdpConformance OBJECT IDENTIFIER ::= { mplsLdpMIB 3 } --******************************************************************** -- MPLS LDP Objects --******************************************************************** mplsLdpEntityObjects OBJECT IDENTIFIER ::= { mplsLdpObjects 1 } -- -- The MPLS Label Distribution Protocol Entity Table -- mplsLdpEntityTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsLdpEntityEntry Expires February 1999 [Page 7] INTERNET-DRAFT MPLS LDP MIB August 1998 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about the MPLS Label Distribution Protocol Entities which exist on this LSR." ::= { mplsLdpEntityObjects 1 } mplsLdpEntityEntry OBJECT-TYPE SYNTAX MplsLdpEntityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents an LDP entity. An entry can be created by a network administrator or by an SNMP agent as instructed by LDP." INDEX { mplsLdpEntityIndex } ::= { mplsLdpEntityTable 1 } MplsLdpEntityEntry ::= SEQUENCE { mplsLdpEntityIndex Integer32, mplsLdpEntityConfId OCTET STRING, mplsLdpEntityConfDefVpi AtmVpIdentifier, mplsLdpEntityConfDefVci AtmVcIdentifier, mplsLdpEntityConfWellKnownDiscoveryPort Unsigned32, mplsLdpEntityConfMtu Integer32, mplsLdpEntityConfKeepAliveHoldTimer Integer32, mplsLdpEntityLoopDetection TruthValue, mplsLdpEntityLoopPrevention TruthValue, mplsLdpEntityFailedInitSessionThreshold Integer32, mplsLdpEntityRowStatus RowStatus } mplsLdpEntityIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A locally arbitrary, but unique identifier for this entity. An agent assigns a unique identifier when the row is created." ::= { mplsLdpEntityEntry 1 } mplsLdpEntityConfId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-create STATUS current Expires February 1999 [Page 8] INTERNET-DRAFT MPLS LDP MIB August 1998 DESCRIPTION "The LDP identifier of this LDP Entity." ::= { mplsLdpEntityEntry 2 } mplsLdpEntityConfDefVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "The Default VPI value used in the label for the default VPI." ::= { mplsLdpEntityEntry 3 } mplsLdpEntityConfDefVci OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "The Default VCI value used in the label for the default VCI." ::= { mplsLdpEntityEntry 4 } mplsLdpEntityConfWellKnownDiscoveryPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The well known LDP Discovery Port." ::= { mplsLdpEntityEntry 5 } mplsLdpEntityConfMtu OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum transmission unit (MTU) that was configured for this entity." ::= { mplsLdpEntityEntry 6 } mplsLdpEntityConfKeepAliveHoldTimer OBJECT-TYPE SYNTAX Integer32 (1..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The two octet value which is the proposed keep alive hold timer for this LDP Entity." Expires February 1999 [Page 9] INTERNET-DRAFT MPLS LDP MIB August 1998 ::= { mplsLdpEntityEntry 7 } mplsLdpEntityLoopDetection OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "A value of true (1) indicates that Loop Detection is 'on' for this entity, a value of false (2) indicates that Loop Detection is off." ::= { mplsLdpEntityEntry 8 } mplsLdpEntityLoopPrevention OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "A value of true(1), indicates that this LDP entity has loop prevention via Diffusion on. A value of false(2), indicates that loop prevention via Diffusion is off." ::= { mplsLdpEntityEntry 9 } mplsLdpEntityFailedInitSessionThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "When attempting to establish a session with a given Peer, the given LDP Entity should send out a notification when exceeding this threshold. A value of 0 (zero) for this object indicates that the threshold is infinity. In other words, a notification will not be sent if the value of this object is 0 (zero)." ::= { mplsLdpEntityEntry 10 } mplsLdpEntityRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "An object that allows entries in this table to be created and deleted using the RowStatus convention." REFERENCE "Textual Conventions for Version 2 of the Simple Network Management Protocol (SNMPv2), RFC1903." Expires February 1999 [Page 10] INTERNET-DRAFT MPLS LDP MIB August 1998 ::= { mplsLdpEntityEntry 11 } -- -- The MPLS LDP Entity Configurable ATM Label Range Table -- mplsLdpEntityConfAtmLabelRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsLdpEntityConfAtmLabelRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MPLS LDP Entity Configurable ATM Label Range Table. The purpose of this table is to provide a mechanism for specifying a contiguous range of vpi's with a contiguous range of vci's, or a 'label range' for LDP Entities. LDP Entities which use ATM must have at least one entry in this table." ::= { mplsLdpEntityObjects 2 } mplsLdpEntityConfAtmLabelRangeEntry OBJECT-TYPE SYNTAX MplsLdpEntityConfAtmLabelRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the LDP Entity Configurable ATM Label Range Table. One entry in this table contains information on a single range of labels represented by the configured Upper and Lower Bounds VPI/VCI pairs. NOTE: The ranges for a specific LDP Entity are UNIQUE and non-overlapping. For example, for a specific LDP Entity index, there could be one entry having ConfLowerBound vpi/vci == 0/32, and ConfUpperBound vpi/vci == 0/100, and a second entry for this same interface with ConfLowerBound vpi/vci == 0/101 and ConfUpperBound vpi/vci == 0/200. However, there could not be a third entry with ConfLowerBound vpi/vci == 0/200 and ConfUpperBound vpi/vci == 0/300 because this label range overlaps with the second entry (i.e. both entries now have 0/200). A row will not be created unless a unique and non-overlapping range is specified. Thus, row creation implies a one-shot row creation of LDP EntityIndex and ConfLowerBound vpi/vci and ConfUpperBound vpi/vci. At least one label range entry for a specific LDP Entity MUST include the default VPI/VCI values denoted in the LDP Entity Table." INDEX { mplsLdpEntityIndex, Expires February 1999 [Page 11] INTERNET-DRAFT MPLS LDP MIB August 1998 mplsLdpEntityConfAtmLabelRangeLowerBoundVPI, mplsLdpEntityConfAtmLabelRangeLowerBoundVCI } ::= { mplsLdpEntityConfAtmLabelRangeTable 1 } MplsLdpEntityConfAtmLabelRangeEntry ::= SEQUENCE { mplsLdpEntityConfAtmLabelRangeLowerBoundVPI AtmVpIdentifier, mplsLdpEntityConfAtmLabelRangeLowerBoundVCI AtmVcIdentifier, mplsLdpEntityConfAtmLabelRangeUpperBoundVPI AtmVpIdentifier, mplsLdpEntityConfAtmLabelRangeUpperBoundVCI AtmVcIdentifier, mplsLdpEntityConfAtmLabelRangeRowStatus RowStatus } mplsLdpEntityConfAtmLabelRangeLowerBoundVPI OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "The minimum VPI number configured for this range." ::= { mplsLdpEntityConfAtmLabelRangeEntry 1 } mplsLdpEntityConfAtmLabelRangeLowerBoundVCI OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "The minimum VCI number configured for this range." ::= { mplsLdpEntityConfAtmLabelRangeEntry 2 } mplsLdpEntityConfAtmLabelRangeUpperBoundVPI OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum VPI number configured for this range." ::= { mplsLdpEntityConfAtmLabelRangeEntry 3 } mplsLdpEntityConfAtmLabelRangeUpperBoundVCI OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum VCI number configured for this range." ::= { mplsLdpEntityConfAtmLabelRangeEntry 4 } mplsLdpEntityConfAtmLabelRangeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create Expires February 1999 [Page 12] INTERNET-DRAFT MPLS LDP MIB August 1998 STATUS current DESCRIPTION "An object that allows entries in this table to be created and deleted using the RowStatus convention." REFERENCE "Textual Conventions for Version 2 of the Simple Network Management Protocol (SNMPv2), RFC1903." ::= { mplsLdpEntityConfAtmLabelRangeEntry 5 } -- -- The MPLS LDP Entity Statistics Table -- mplsLdpEntityStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsLdpEntityStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is a read-only table which augments the MplsLdpConfEntityTable. The purpose of this table is to keep statistical information about the LDP Entities on the LSR." ::= { mplsLdpEntityObjects 3 } mplsLdpEntityStatsEntry OBJECT-TYPE SYNTAX MplsLdpEntityStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table contains statistical information about an LDP Entity." AUGMENTS { mplsLdpEntityEntry } ::= { mplsLdpEntityStatsTable 1 } MplsLdpEntityStatsEntry ::= SEQUENCE { mplsLdpEstablishedSessions Counter32, mplsLdpAttemptedSessions Counter32 } mplsLdpEstablishedSessions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the total established sessions for this LDP Entity." Expires February 1999 [Page 13] INTERNET-DRAFT MPLS LDP MIB August 1998 ::= { mplsLdpEntityStatsEntry 1 } mplsLdpAttemptedSessions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the total attempted sessions for this LDP Entity." ::= { mplsLdpEntityStatsEntry 2 } -- -- The MPLS LDP Peer Table -- mplsLdpPeerObjects OBJECT IDENTIFIER ::= { mplsLdpObjects 2 } mplsLdpPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsLdpPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about LDP peers which have been discovered by the LDP Entities that are managed by this agent." ::= { mplsLdpPeerObjects 1 } mplsLdpPeerEntry OBJECT-TYPE SYNTAX MplsLdpPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a single Peer." INDEX { mplsLdpEntityIndex, mplsLdpPeerIndex } ::= { mplsLdpPeerTable 1 } MplsLdpPeerEntry ::= SEQUENCE { mplsLdpPeerIndex Integer32, mplsLdpPeerId OCTET STRING, mplsLdpPeerInternetworkAddrType MplsLdpIANAAddrFamily, mplsLdpPeerInternetworkAddr MplsLdpGenAddr, mplsLdpPeerDefaultMtu Integer32, mplsLdpPeerKeepAliveHoldTimer Integer32, mplsLdpPeerRowStatus RowStatus } Expires February 1999 [Page 14] INTERNET-DRAFT MPLS LDP MIB August 1998 mplsLdpPeerIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An identifier for the LDP peer that is unique within the scope of this agent." ::= { mplsLdpPeerEntry 1 } mplsLdpPeerId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-create STATUS current DESCRIPTION "The LDP identifier of this LDP Peer." ::= { mplsLdpPeerEntry 2 } mplsLdpPeerInternetworkAddrType OBJECT-TYPE SYNTAX MplsLdpIANAAddrFamily MAX-ACCESS read-create STATUS current DESCRIPTION "The type of the internetwork layer address of this LDP peer. This object indicates how the value of mplsLdpPeerInternetworkAddr is to be interpreted." ::= { mplsLdpPeerEntry 3 } mplsLdpPeerInternetworkAddr OBJECT-TYPE SYNTAX MplsLdpGenAddr MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the internetwork layer address of this LDP peer." ::= { mplsLdpPeerEntry 4 } mplsLdpPeerDefaultMtu OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The default maximum transmission unit (MTU) of the LDP Peer." DEFVAL { 9180 } ::= { mplsLdpPeerEntry 5 } mplsLdpPeerKeepAliveHoldTimer OBJECT-TYPE SYNTAX Integer32 (1..65535) Expires February 1999 [Page 15] INTERNET-DRAFT MPLS LDP MIB August 1998 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The two octet unsigned non zero integer that indicates the number of seconds that this Peer proposes for the value of the KeepAlive Interval." ::= { mplsLdpPeerEntry 6 } mplsLdpPeerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "An object that allows entries in this table to be created and deleted using the RowStatus convention." REFERENCE "Textual Conventions for Version 2 of the Simple Network Management Protocol (SNMPv2), RFC1903." ::= { mplsLdpPeerEntry 7 } -- -- The MPLS LDP Peer Configurable ATM Label Range Table -- mplsLdpPeerConfAtmLabelRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsLdpPeerConfAtmLabelRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MPLS LDP Peer Configurable ATM Label Range Table. The purpose of this table is to provide a mechanism for specifying a contiguous range of vpi's with a contiguous range of vci's, or a 'label range' for LDP Peers. LDP Peers which use ATM must have at least one entry in this table." ::= { mplsLdpPeerObjects 2 } mplsLdpPeerConfAtmLabelRangeEntry OBJECT-TYPE SYNTAX MplsLdpPeerConfAtmLabelRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the LDP Peer Configurable ATM Label Range Table. One entry in this table contains information on a single range of labels represented by the configured Upper and Lower Bounds VPI/VCI pairs. Expires February 1999 [Page 16] INTERNET-DRAFT MPLS LDP MIB August 1998 NOTE: The ranges for a specific LDP Peer are UNIQUE and non-overlapping. For example, for a specific LDP Peer index, there could be one entry having ConfLowerBound vpi/vci == 0/32, and ConfUpperBound vpi/vci == 0/100, and a second entry for this same interface with ConfLowerBound vpi/vci == 0/101 and ConfUpperBound vpi/vci == 0/200. However, there could not be a third entry with ConfLowerBound vpi/vci == 0/200 and ConfUpperBound vpi/vci == 0/300 because this label range overlaps with the second entry (i.e. both entries now have 0/200). A row will not be created unless a unique and non-overlapping range is specified. Thus, row creation implies a one-shot row creation of LDP PeerIndex and ConfLowerBound vpi/vci and ConfUpperBound vpi/vci. At least one label range entry for a specific LDP Peer MUST include the default VPI/VCI values denoted in the LDP Peer Table." INDEX { mplsLdpPeerIndex, mplsLdpPeerConfAtmLabelRangeLowerBoundVPI, mplsLdpPeerConfAtmLabelRangeLowerBoundVCI } ::= { mplsLdpPeerConfAtmLabelRangeTable 1 } MplsLdpPeerConfAtmLabelRangeEntry ::= SEQUENCE { mplsLdpPeerConfAtmLabelRangeLowerBoundVPI AtmVpIdentifier, mplsLdpPeerConfAtmLabelRangeLowerBoundVCI AtmVcIdentifier, mplsLdpPeerConfAtmLabelRangeUpperBoundVPI AtmVpIdentifier, mplsLdpPeerConfAtmLabelRangeUpperBoundVCI AtmVcIdentifier, mplsLdpPeerConfAtmLabelRangeRowStatus RowStatus } mplsLdpPeerConfAtmLabelRangeLowerBoundVPI OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "The minimum VPI number configured for this range." ::= { mplsLdpPeerConfAtmLabelRangeEntry 1 } mplsLdpPeerConfAtmLabelRangeLowerBoundVCI OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "The minimum VCI number configured for this range." ::= { mplsLdpPeerConfAtmLabelRangeEntry 2 } mplsLdpPeerConfAtmLabelRangeUpperBoundVPI OBJECT-TYPE Expires February 1999 [Page 17] INTERNET-DRAFT MPLS LDP MIB August 1998 SYNTAX AtmVpIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum VPI number configured for this range." ::= { mplsLdpPeerConfAtmLabelRangeEntry 3 } mplsLdpPeerConfAtmLabelRangeUpperBoundVCI OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum VCI number configured for this range." ::= { mplsLdpPeerConfAtmLabelRangeEntry 4 } mplsLdpPeerConfAtmLabelRangeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "An object that allows entries in this table to be created and deleted using the RowStatus convention." REFERENCE "Textual Conventions for Version 2 of the Simple Network Management Protocol (SNMPv2), RFC1903." ::= { mplsLdpPeerConfAtmLabelRangeEntry 5 } -- -- The MPLS LDP Sessions Table -- mplsLdpSessionObjects OBJECT IDENTIFIER ::= { mplsLdpObjects 3 } mplsLdpSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsLdpSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Sessions between the LDP Entities and LDP Peers." ::= { mplsLdpSessionObjects 1 } mplsLdpSessionEntry OBJECT-TYPE SYNTAX MplsLdpSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION Expires February 1999 [Page 18] INTERNET-DRAFT MPLS LDP MIB August 1998 "An entry in this table represents information on a single session between an LDP Entity and LDP Peer." INDEX { mplsLdpEntityIndex, mplsLdpPeerIndex, mplsLdpSessionIndex } ::= { mplsLdpSessionTable 1 } MplsLdpSessionEntry ::= SEQUENCE { mplsLdpSessionIndex Integer32, mplsLdpSessionId OCTET STRING, mplsLdpSessionProtocolVersion Integer32, mplsLdpSessionKeepAliveHoldTimeRemaining TimeInterval, mplsLdpSessionRole INTEGER, mplsLdpSessionState INTEGER, mplsLdpSessionAtmLabelRangeLowerBoundVPI AtmVpIdentifier, mplsLdpSessionAtmLabelRangeLowerBoundVCI AtmVcIdentifier, mplsLdpSessionAtmLabelRangeUpperBoundVPI AtmVpIdentifier, mplsLdpSessionAtmLabelRangeUpperBoundVCI AtmVcIdentifier, mplsLdpSessionRowStatus RowStatus } mplsLdpSessionIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An unique identifier for this entry such that it identifies a specific LDP Session." ::= { mplsLdpSessionEntry 1 } mplsLdpSessionId OBJECT-TYPE SYNTAX OCTET STRING(SIZE(6)) MAX-ACCESS read-only STATUS current DESCRIPTION "The LDP Session identifier." ::= { mplsLdpSessionEntry 2 } mplsLdpSessionProtocolVersion OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The version of the LDP Protocol which this session is using." ::= { mplsLdpSessionEntry 3 } Expires February 1999 [Page 19] INTERNET-DRAFT MPLS LDP MIB August 1998 mplsLdpSessionKeepAliveHoldTimeRemaining OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The keep alive hold time remaining for this session." ::= { mplsLdpSessionEntry 4 } mplsLdpSessionRole OBJECT-TYPE SYNTAX INTEGER { active(1), passive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "An indication of whether the LDP Entity associated with this session is acting in an 'active' role or a 'passive' role." ::= { mplsLdpSessionEntry 5 } mplsLdpSessionState OBJECT-TYPE SYNTAX INTEGER { nonexistent(1), initialized(2), openrec(3), opensent(4), operational(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the session, all of the states 1 - 5 are based on the state machine for session negotiation behavior." ::= { mplsLdpSessionEntry 6 } mplsLdpSessionAtmLabelRangeLowerBoundVPI OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum VPI number for this range." ::= { mplsLdpSessionEntry 7 } mplsLdpSessionAtmLabelRangeLowerBoundVCI OBJECT-TYPE SYNTAX AtmVcIdentifier Expires February 1999 [Page 20] INTERNET-DRAFT MPLS LDP MIB August 1998 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum VCI number for this range." ::= { mplsLdpSessionEntry 8 } mplsLdpSessionAtmLabelRangeUpperBoundVPI OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum VPI number for this range." ::= { mplsLdpSessionEntry 9 } mplsLdpSessionAtmLabelRangeUpperBoundVCI OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum VCI number for this range." ::= { mplsLdpSessionEntry 10 } mplsLdpSessionRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "An object that allows entries in this table to be created and deleted using the RowStatus convention." REFERENCE "Textual Conventions for Version 2 of the Simple Network Management Protocol (SNMPv2), RFC1903." ::= { mplsLdpSessionEntry 11 } -- -- The MPLS LDP Hello Adjacency Table -- mplsLdpHelloAdjacencyObjects OBJECT IDENTIFIER ::= { mplsLdpObjects 4 } mplsLdpHelloAdjacencyTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsLdpHelloAdjacencyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Hello Adjacencies for Sessions." ::= { mplsLdpHelloAdjacencyObjects 1 } Expires February 1999 [Page 21] INTERNET-DRAFT MPLS LDP MIB August 1998 mplsLdpHelloAdjacencyEntry OBJECT-TYPE SYNTAX MplsLdpHelloAdjacencyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row represents a single LDP Hello Adjacency. An LDP Session can have one or more Hello adjacencies." INDEX { mplsLdpSessionIndex, mplsLdpHelloAdjacencyIndex } ::= { mplsLdpHelloAdjacencyTable 1 } MplsLdpHelloAdjacencyEntry ::= SEQUENCE { mplsLdpHelloAdjacencyIndex Integer32, mplsLdpHelloAdjacencyHoldTimeRemaining TimeInterval } mplsLdpHelloAdjacencyIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An identifier for the adjacency." ::= { mplsLdpHelloAdjacencyEntry 1 } mplsLdpHelloAdjacencyHoldTimeRemaining OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining for this Hello Adjacency." ::= { mplsLdpHelloAdjacencyEntry 2 } --- --- Notifications --- mplsLdpNotificationPrefix OBJECT IDENTIFIER ::= { mplsLdpNotifications 0 } mplsLdpFailedInitSessionThresholdExceeded NOTIFICATION-TYPE OBJECTS { mplsLdpEntityFailedInitSessionThreshold } STATUS current DESCRIPTION "This notification is generated whenever the value of mplsLdpEntityFailedInitSessionThreshold is Expires February 1999 [Page 22] INTERNET-DRAFT MPLS LDP MIB August 1998 exceeded." ::= { mplsLdpNotificationPrefix 1 } --******************************************************************** -- Module Compliance Statement --******************************************************************** mplsLdpGroups OBJECT IDENTIFIER ::= { mplsLdpConformance 1 } mplsLdpCompliances OBJECT IDENTIFIER ::= { mplsLdpConformance 2 } mplsLdpModuleCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for agents that support the MPLS LDP MIB." MODULE -- this module MANDATORY-GROUPS { mplsLdpGeneralGroup, mplsLdpNotificationsGroup } OBJECT mplsLdpEntityRowStatus MIN-ACCESS read-only DESCRIPTION "The agent is not required to support a SET operation to this object." OBJECT mplsLdpPeerRowStatus MIN-ACCESS read-only DESCRIPTION "The agent is not required to support a SET operation to this object." ::= { mplsLdpCompliances 1 } -- units of conformance mplsLdpGeneralGroup OBJECT-GROUP OBJECTS { mplsLdpEntityIndex, mplsLdpEntityConfId, mplsLdpEntityConfDefVpi, mplsLdpEntityConfDefVci, mplsLdpEntityConfWellKnownDiscoveryPort, mplsLdpEntityConfMtu, Expires February 1999 [Page 23] INTERNET-DRAFT MPLS LDP MIB August 1998 mplsLdpEntityConfKeepAliveHoldTimer, mplsLdpEntityLoopDetection, mplsLdpEntityLoopPrevention, mplsLdpEntityFailedInitSessionThreshold, mplsLdpEntityRowStatus, mplsLdpEntityConfAtmLabelRangeLowerBoundVPI, mplsLdpEntityConfAtmLabelRangeLowerBoundVCI, mplsLdpEntityConfAtmLabelRangeUpperBoundVPI, mplsLdpEntityConfAtmLabelRangeUpperBoundVCI, mplsLdpEntityConfAtmLabelRangeRowStatus, mplsLdpEstablishedSessions, mplsLdpAttemptedSessions, mplsLdpPeerIndex, mplsLdpPeerId, mplsLdpPeerInternetworkAddrType, mplsLdpPeerInternetworkAddr, mplsLdpPeerDefaultMtu, mplsLdpPeerKeepAliveHoldTimer, mplsLdpPeerRowStatus, mplsLdpPeerConfAtmLabelRangeLowerBoundVPI, mplsLdpPeerConfAtmLabelRangeLowerBoundVCI, mplsLdpPeerConfAtmLabelRangeUpperBoundVPI, mplsLdpPeerConfAtmLabelRangeUpperBoundVCI, mplsLdpPeerConfAtmLabelRangeRowStatus, mplsLdpSessionIndex, mplsLdpSessionId, mplsLdpSessionProtocolVersion, mplsLdpSessionKeepAliveHoldTimeRemaining, mplsLdpSessionRole, mplsLdpSessionState, mplsLdpSessionAtmLabelRangeLowerBoundVPI, mplsLdpSessionAtmLabelRangeLowerBoundVCI, mplsLdpSessionAtmLabelRangeUpperBoundVPI, mplsLdpSessionAtmLabelRangeUpperBoundVCI, mplsLdpSessionRowStatus, mplsLdpHelloAdjacencyIndex, mplsLdpHelloAdjacencyHoldTimeRemaining } STATUS current DESCRIPTION "Objects that apply to all MPLS LDP implementations over ATM." ::= { mplsLdpGroups 1 } mplsLdpNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { mplsLdpFailedInitSessionThresholdExceeded } STATUS current Expires February 1999 [Page 24] INTERNET-DRAFT MPLS LDP MIB August 1998 DESCRIPTION "The notification(s) which an MPLS LDP implemention is required to implement." ::= { mplsLdpGroups 2 } END Expires February 1999 [Page 25] INTERNET-DRAFT MPLS LDP MIB August 1998 4. Acknowledgments The authors would like to thank the following people: Leigh McLellan, Geetha Brown, Geping Chen and Charlan Zhou from Bay Networks, and Zoltan Takacs and Bo Augustsson from Ericsson. Expires February 1999 [Page 26] INTERNET-DRAFT MPLS LDP MIB August 1998 5. References [1] Harrington, D., Presuhn, R., and B. Wijnen, "An Architecture for Describing SNMP Management Frameworks", RFC 2271, Cabletron Systems, Inc., BMC Software, Inc., IBM T. J. Watson Research, January 1998 [2] Rose, M., and K. McCloghrie, "Structure and Identification of Management Information for TCP/IP-based Internets", RFC 1155, Performance Systems International, Hughes LAN Systems, May 1990 [3] Rose, M., and K. McCloghrie, "Concise MIB Definitions", RFC 1212, Performance Systems International, Hughes LAN Systems, March 1991 [4] M. Rose, "A Convention for Defining Traps for use with the SNMP", RFC 1215, Performance Systems International, March 1991 [5] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Structure of Management Information for Version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1902, SNMP Research,Inc., Cisco Systems, Inc., Dover Beach Consulting, Inc., International Network Services, January 1996. [6] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Textual Conventions for Version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1903, SNMP Research, Inc., Cisco Systems, Inc., Dover Beach Consulting, Inc., International Network Services, January 1996. [7] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Conformance Statements for Version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1904, SNMP Research, Inc., Cisco Systems, Inc., Dover Beach Consulting, Inc., International Network Services, January 1996. [8] Case, J., Fedor, M., Schoffstall, M., and J. Davin, "Simple Network Management Protocol", RFC 1157, SNMP Research, Performance Systems International, Performance Systems International, MIT Laboratory for Computer Science, May 1990. [9] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Introduction to Community-based SNMPv2", RFC 1901, SNMP Research, Inc., Cisco Systems, Inc., Dover Beach Consulting, Inc., International Network Services, January 1996. [10] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Transport Mappings for Version 2 of the Simple Network Management Protocol Expires February 1999 [Page 27] INTERNET-DRAFT MPLS LDP MIB August 1998 (SNMPv2)", RFC 1906, SNMP Research, Inc., Cisco Systems, Inc., Dover Beach Consulting, Inc., International Network Services, January 1996. [11] Case, J., Harrington D., Presuhn R., and B. Wijnen, "Message Processing and Dispatching for the Simple Network Management Protocol (SNMP)", RFC 2272, SNMP Research, Inc., Cabletron Systems, Inc., BMC Software, Inc., IBM T. J. Watson Research, January 1998. [12] Blumenthal, U., and B. Wijnen, "User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3)", RFC 2274, IBM T. J. Watson Research, January 1998. [13] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Protocol Operations for Version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1905, SNMP Research, Inc., Cisco Systems, Inc., Dover Beach Consulting, Inc., International Network Services, January 1996. [14] Levi, D., Meyer, P., and B. Stewart, "SNMPv3 Applications", RFC 2273, SNMP Research, Inc., Secure Computing Corporation, Cisco Systems, January 1998 [15] Wijnen, B., Presuhn, R., and K. McCloghrie, "View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP)", RFC 2275, IBM T. J. Watson Research, BMC Software, Inc., Cisco Systems, Inc., January 1998 [16] Narten, T., and H. Alvestrand, "Guidelines for Writing an IANA Considerations Section in RFCs", draft-iesg-iana-considerations- 04.txt, IBM, UNINETT, May 1998. [17] Andersson, Loa, Doolan, P., Feldman, N., Fredette, A., and Thomas, R., "Label Distribution Protocol.", draft-ietf-mpls-ldp-01.txt, Bay Networks, Ennovate Networks, IBM, Bay Networks, cisco Systems March 1998. [18] Callon, R., Doolan, P., Feldman, N., Fredette, A., Swallow, G., and A. Viswanathan., "A Framework for Multiprotocol Label Switching", draft-ietf-mpls-framework-02.txt, Ascend Communications, Ennovate Networks, IBM, Bay Networks, cisco Systems, November 1997. Expires February 1999 [Page 28] INTERNET-DRAFT MPLS LDP MIB August 1998 6. Security Considerations 7. Authors' Addresses Joan Cucchiara Bay Networks 3 Federal Street Mail Stop: BL3-03 Billerica, MA 01821 Phone: (978) 916-8555 Email: joanc@baynetworks.com Hans Sjostrand Ericsson Business Unit Datacom Networks and IP Services S-126 25 Stockholm, Sweden Phone: +46 8 719 9960 Email: hans.sjostrand@etx.ericsson.se James V. Luciani Bay Networks 3 Federal Street Mail Stop: BL3-03 Billerica, MA 01821 Phone: (978) 916-4734 Email: luciani@baynetworks.com Expires February 1999 [Page 29] INTERNET-DRAFT MPLS LDP MIB August 1998 Full Copyright Statement Copyright (C) The Internet Society (1998). All Rights Reserved. This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other Internet organizations, except as needed for the purpose of developing Internet standards in which case the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English.