Xilinx: Mentor Graphics Interface - Top Solutions

Mentor Graphics Interface: Top Solutions
To access our full database of Xilinx Solutions, please consult our Answers Search.
Hot Solutions

Solution 6554 - Mentor Exemplar Xilinx 2.1i: Running pld_dsgnmgr through Mentor DM or using the Design Manager option from Exemplar's P&R tab, I can not choose my options before implementing as i did before with A1.5

Solution 6555 - Mentor-Xilinx Interface 2.1i: After choosing Quicksim for my simulation in the Xilinx GUI and implementing, I don't see the time_sim.edn for back-end simulation

Solution 6897 - Mentor: I can not check nor convert my old 4K (4000 non-E) schematic design to 4KE or 4KX using A1.5 or later Xilinx software

Solution 2100 - M1 PLD_EDIF2TIM: Error: Cannot find library specified "SIMPRIMS"

Solution 2781 - M1 NGDBUILD: ERROR:bascp:69 and/or WARNING:basts:19 on Mentor TIMEGRPs

Solution 2847 - M1 QuickHDL: VHDL/VITAL RAMs do not simulate properly or respond to stimuli on HP-UX

Solution 2899 - M1: QuickSim functional simulation of a Mentor schematic with instantiated XNF

Solution 3046 - M1: QuickSim functional simulation of a Mentor schematic with instantiated EDIF (without XNF)

Most Requested Solutions

Solution 798 - Retargeting a design in Design Architect (Convert Design)

Solution 893 - QuickSim/Solaris: Could not load object file xxx.ss5_b, no such file or directory

Solution 997 - Using XACT 5.2.1 with Mentor Graphics' B.x release

Solution 2100 - M1 PLD_EDIF2TIM: Error: Cannot find library specified "SIMPRIMS"

Solution 2478 - M1 QuickHDL: How to compile the M1 HDL simprim, LogiBLOX, and Unisim libraries

Solution 2847 - M1 QuickHDL: VHDL/VITAL RAMs do not simulate properly or respond to stimuli on HP-UX

Solution 2899 - M1: QuickSim functional simulation of a Mentor schematic with instantiated XNF

Trademarks and Patents
Legal Information
Privacy Policy

| Home | Products | Support | Education | Purchase | Contact | Search |