As we cover in Chapter 6, the transfer function of a digital filter
is defined as
where
is the z transform of the input
signal
, and
is the z transform of the output signal
. We
may find
from Eq. (3.1) by taking the z transform of both sides
and solving for
:
Some principles of this analysis are as follows:
In matlab, difference-equation coefficients are specified as transfer-function coefficients (vectors B and A in Fig.3.5). This is why a minus sign is needed in Eq. (3.3).
Ok, so finding the transfer function is not too much work. Now, what
can we do with it? There are two main avenues of analysis from here:
(1) finding the frequency response by setting
, and
(2) factoring the transfer function to find the poles and
zeros of the filter. One also uses the transfer function to generate
different implementation forms such as cascade or parallel
combinations of smaller filters to achieve the same overall filter.
The following sections will illustrate these uses of the transfer
function on the example filter of this chapter.