Section 6.2
Applets and HTML
Although stand-alone applications are probably more important than applets at this point in the history of Java, applets are still widely used. They can do things on Web pages that can't easily be done with other technologies. It is easy to distribute applets to users: The user just has to open a Web page, and the applet is there, with no special installation required (although the user must have an appropriate version of Java installed on their computer). And of course, applets are fun; now that the Web has become such a common part of life, it's nice to be able to see your work running on a web page.
The good news is that writing applets is not much different from writing stand-alone applications. The structure of an applet is essentially the same as the structure of the JFrames that were introduced in the previous section, and events are handled in the same way in both types of program. So, most of what you learn about applications applies to applets, and vice versa.
Of course, one difference is that an applet is dependent on a Web page, so to use applets effectively, you have to learn at least a little about creating Web pages. Web pages are written using a language called HTML (HyperText Markup Language). In Subsection 6.2.3, below, you'll learn how to use HTML to create Web pages that display applets.
6.2.1 JApplet
The JApplet class (in package javax.swing) can be used as a basis for writing applets in the same way that JFrame is used for writing stand-alone applications. The basic JApplet class represents a blank rectangular area. Since an applet is not a stand-alone application, this area must appear on a Web page, or in some other environment that knows how to display an applet. Like a JFrame, a JApplet contains a content pane (and can contain a menu bar). You can add content to an applet either by adding content to its content pane or by replacing the content pane with another component. In my examples, I will generally create a JPanel and use it as a replacement for the applet's content pane.
To create an applet, you will write a subclass of JApplet. The JApplet class defines several instance methods that are unique to applets. These methods are called by the applet's environment at certain points during the applet's "life cycle." In the JApplet class itself, these methods do nothing; you can override these methods in a subclass. The most important of these special applet methods is
public void init()
An applet's init() method is called when the applet is created. You can use the init() method as a place where you can set up the physical structure of the applet and the event handling that will determine its behavior. (You can also do some initialization in the constructor for your class, but there are certain aspects of the applet's environment that are set up after its constructor is called but before the init() method is called, so there are a few operations that will work in the init() method but will not work in the constructor.) The other applet life-cycle methods are start(), stop(), and destroy(). I will not use these methods for the time being and will not discuss them here except to mention that destroy() is called at the end of the applet's lifetime and can be used as a place to do any necessary cleanup, such as closing any windows that were opened by the applet.
With this in mind, we can look at our first example of a JApplet. It is, of course, an applet that says "Hello World!". To make it a little more interesting, I have added a button that changes the text of the message, and a state variable, currentMessage that holds the text of the current message. This example is very similar to the stand-alone application HelloWorldGUI2 from the previous section. It uses an event-handling class to respond when the user clicks the button, a panel to display the message, and another panel that serves as a container for the message panel and the button. The second panel becomes the content pane of the applet. Here is the source code for the applet; again, you are not expected to understand all the details at this time:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
/**
* A simple applet that can display the messages "Hello World"
* and "Goodbye World". The applet contains a button, and it
* switches from one message to the other when the button is
* clicked.
*/
public class HelloWorldApplet extends JApplet {
private String currentMessage = "Hello World!"; // Currently displayed message.
private MessageDisplay displayPanel; // The panel where the message is displayed.
private class MessageDisplay extends JPanel { // Defines the display panel.
public void paintComponent(Graphics g) {
super.paintComponent(g);
g.drawString(currentMessage, 20, 30);
}
}
private class ButtonHandler implements ActionListener { // The event listener.
public void actionPerformed(ActionEvent e) {
if (currentMessage.equals("Hello World!"))
currentMessage = "Goodbye World!";
else
currentMessage = "Hello World!";
displayPanel.repaint(); // Paint display panel with new message.
}
}
/**
* The applet's init() method creates the button and display panel and
* adds them to the applet, and it sets up a listener to respond to
* clicks on the button.
*/
public void init() {
displayPanel = new MessageDisplay();
JButton changeMessageButton = new JButton("Change Message");
ButtonHandler listener = new ButtonHandler();
changeMessageButton.addActionListener(listener);
JPanel content = new JPanel();
content.setLayout(new BorderLayout());
content.add(displayPanel, BorderLayout.CENTER);
content.add(changeMessageButton, BorderLayout.SOUTH);
setContentPane(content);
}
}
You should compare this class with HelloWorldGUI2.java from the previous section. One subtle difference that you will notice is that the member variables and nested classes in this example are non-static. Remember that an applet is an object. A single class can be used to make several applets, and each of those applets will need its own copy of the applet data, so the member variables in which the data is stored must be non-static instance variables. Since the variables are non-static, the two nested classes, which use those variables, must also be non-static. (Static nested classes cannot access non-static member variables in the containing class; see Subsection 5.7.2.) Remember the basic rule for deciding whether to make a nested class static: If it needs access to any instance variable or instance method in the containing class, the nested class must be non-static; otherwise, it can be declared to be static.
You can try out the applet itself. Click the "Change Message" button to switch the message back and forth between "Hello World!" and "Goodbye World!":
6.2.2 Reusing Your JPanels
Both applets and frames can be programmed in the same way: Design a JPanel, and use it to replace the default content pane in the applet or frame. This makes it very easy to write two versions of a program, one which runs as an applet and one which runs as a frame. The idea is to create a subclass of JPanel that represents the content pane for your program; all the hard programming work is done in this panel class. An object of this class can then be used as the content pane either in a frame or in an applet. Only a very simple main() program is needed to show your panel in a frame, and only a very simple applet class is needed to show your panel in an applet, so it's easy to make both versions.
As an example, we can rewrite HelloWorldApplet by writing a subclass of JPanel. That class can then be reused to make a frame in a standalone application. This class is very similar to HelloWorldApplet, but now the initialization is done in a constructor instead of in an init() method:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class HelloWorldPanel extends JPanel {
private String currentMessage = "Hello World!"; // Currently displayed message.
private MessageDisplay displayPanel; // The panel where the message is displayed.
private class MessageDisplay extends JPanel { // Defines the display panel.
public void paintComponent(Graphics g) {
super.paintComponent(g);
g.drawString(currentMessage, 20, 30);
}
}
private class ButtonHandler implements ActionListener { // The event listener.
public void actionPerformed(ActionEvent e) {
if (currentMessage.equals("Hello World!"))
currentMessage = "Goodbye World!";
else
currentMessage = "Hello World!";
displayPanel.repaint(); // Paint display panel with new message.
}
}
/**
* The constructor creates the components that will be contained inside this
* panel, and then adds those components to this panel.
*/
public HelloWorldPanel() {
displayPanel = new MessageDisplay(); // Create the display subpanel.
JButton changeMessageButton = new JButton("Change Message"); // The button.
ButtonHandler listener = new ButtonHandler();
changeMessageButton.addActionListener(listener);
setLayout(new BorderLayout()); // Set the layout manager for this panel.
add(displayPanel, BorderLayout.CENTER); // Add the display panel.
add(changeMessageButton, BorderLayout.SOUTH); // Add the button.
}
}
Once this class exists, it can be used in an applet. The applet class only has to create an object of type HelloWorldPanel and use that object as its content pane:
import javax.swing.JApplet;
public class HelloWorldApplet2 extends JApplet {
public void init() {
HelloWorldPanel content = new HelloWorldPanel();
setContentPane(content);
}
}
Similarly, its easy to make a frame that uses an object of type HelloWorldPanel as its content pane:
import javax.swing.JFrame;
public class HelloWorldGUI3 {
public static void main(String[] args) {
JFrame window = new JFrame("GUI Test");
HelloWorldPanel content = new HelloWorldPanel();
window.setContentPane(content);
window.setSize(250,100);
window.setLocation(100,100);
window.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
window.setVisible(true);
}
}
One new feature of this example is the line
window.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
This says that when the user closes the window by clicking the close box in the title bar of the window, the program should be terminated. This is necessary because no other way is provided to end the program. Without this line, the default close operation of the window would simply hide the window when the user clicks the close box, leaving the program running. This brings up one of the difficulties of reusing the same panel class both in an applet and in a frame: There are some things that a stand-alone application can do that an applet can't do. Terminating the program is one of those things. If an applet calls System.exit(), it has no effect except to generate an error.
Nevertheless, in spite of occasional minor difficulties, many of the GUI examples in this book will be written as subclasses of JPanel that can be used either in an applet or in a frame.
6.2.3 Basic HTML
Before you can actually use an applet that you have written, you need to create a Web page on which to place the applet. Such pages are themselves written in a language called HTML (HyperText Markup Language). An HTML document describes the contents of a page. A Web browser interprets the HTML code to determine what to display on the page. The HTML code doesn't look much like the resulting page that appears in the browser. The HTML document does contain all the text that appears on the page, but that text is "marked up" with commands that determine the structure and appearance of the text and determine what will appear on the page in addition to the text.
HTML has become a rather complicated language. In this section, I will cover just the most basic aspects of the language. You can easily find more information on the Web, if you want to learn more. Although there are many Web-authoring programs that make it possible to create Web pages without ever looking at the underlying HTML code, it is possible to write an HTML page using an ordinary text editor, typing in all the mark-up commands by hand, and it is worthwhile to learn how to create at least simple pages in this way.
There is a strict syntax for HTML documents (although in practice Web browsers will do their best to display a page even if it does not follow the syntax strictly). Leaving out optional features, an HTML document has the form:
<html> <head> <title>document-title</title> </head> <body> document-content </body> </html>
The document-title is text that will appear in the title bar of the Web browser window when the page is displayed. The document-content is what is displayed on the page itself. The rest of this section describes some of the things that can go into the document-content section of an HTML document
The mark-up commands used by HTML are called tags. Examples include <html> and <title> in the document outline given above. An HTML tag takes the form
<tag-name optional-modifiers>
where the tag-name is a word that specifies the command, and the optional-modifiers, if present, are used to provide additional information for the command (much like parameters in subroutines). A modifier takes the form
modifier-name = value
Usually, the value is enclosed in quotes, and it must be if it is more than one word long or if it contains certain special characters. There are a few modifiers which have no value, in which case only the name of the modifier is present. HTML is case insensitive, which means that you can use upper case and lower case letters interchangeably in tags and modifiers. (However, lower case is generally used because XHTML, a successor language to HTML, requires lower case.)
A simple example of a tag is <hr>, which draws a line -- also called a "horizontal rule" -- across the page. The hr tag can take several possible modifiers such as width and align. For example, a horizontal line that extends halfway across the page could be generated with the tag:
<HR width="50%">
The width here is specified as 50% of the available space, meaning a line that extends halfway across the page. The width could also be given as a fixed number of pixels.
Many tags require matching closing tags, which take the form
</tag-name>
For example, the <html> tag at the beginning of an HTML document must be matched by a closing </html> tag at the end of the document. As another example, the tag <pre> must always have a matching closing tag </pre> later in the document. An opening/closing tag pair applies to everything that comes between the opening tag and the closing tag. The <pre> tag tells a Web browser to display everything between the <pre> and the </pre> just as it is formatted in the original HTML source code, including all the spaces and carriage returns. (But tags between <pre> and </pre> are still interpreted by the browser.) "Pre" stands for preformatted text. All of the sample programs in this book are formatted using the <pre> command.
It is important for you to understand that when you don't use <pre>, the computer will completely ignore the formatting of the text in the HTML source code. The only thing it pays attention to is the tags. Five blank lines in the source code have no more effect than one blank line or even a single blank space. Outside of <pre>, if you want to force a new line on the Web page, you can use the tag <br>, which stands for "break". For example, I might give my address as:
David Eck<br> Department of Mathematics and Computer Science<br> Hobart and William Smith Colleges<br> Geneva, NY 14456<br>
If you want extra vertical space in your web page, you can use several <br>'s in a row.
Similarly, you need a tag to indicate how the text should be broken up into paragraphs. This is done with the <p> tag, which should be placed at the beginning of every paragraph. The <p> tag has a matching </p>, which should be placed at the end of each paragraph. The closing </p> is technically optional, but it is considered good form to use it. If you want all the lines of the paragraph to be shoved over to the right, you can use <p align=right> instead of <p>. (This is mostly useful when used with one short line, or when used with <br> to make several short lines.) You can also use <p align=center> for centered lines.
By the way, if tags like <p> and <hr> have special meanings in HTML, you might wonder how one can get them to appear here on this page. To get certain special characters to appear on the page, you have to use an entity name in the HTML source code. The entity name for < is <, and the entity name for > is >. Entity names begin with & and end with a semicolon. The character & is itself a special character whose entity name is &. There are also entity names for nonstandard characters such as an accented "e", which has the entity name é.
There are several useful tags that change the appearance of text. For example, to get italic text, enclose the text between <i> and </i>. For example,
<i>Introduction to Programming using Java</i>
in an HTML document gives Introduction to Programming using Java in italics when the document is displayed as a Web page. Similarly, the tags <b>, <u>, and <tt> can be used for bold, underlined, and typewriter-style ("monospace") text.
A headline, with very large text, can be made placing the the text between <h1> and </h1>. Headlines with smaller text can be made using <h2> or <h3> instead of <h1>. Note that these headline tags stand on their own; they are not use inside paragraphs. You can add the modifier align=center to center the headline, and you can include break tags (<br>) in a headline to break it up into multiple lines. For example, the following HTML code will produce a medium--sized, centered, two-line headline:
<h2 align=center>Chapter 6:<br>Introduction to GUI Programming</h2>
The most distinctive feature of HTML is that documents can contain links to other documents. The user can follow links from page to page and in the process visit pages from all over the Internet.
The <a> tag is used to create a link. The text between the <a> and its matching </a> appears on the page as the text of the link; the user can follow the link by clicking on this text. The <a> tag uses the modifier href to say which document the link should connect to. The value for href must be a URL (Uniform Resource Locator). A URL is a coded set of instructions for finding a document on the Internet. For example, the URL for my own "home page" is
http://math.hws.edu/eck/
To make a link to this page, such as David's Home Page, I would use the HTML source code
<a href="http://math.hws.edu/eck/">David's Home Page</a>
The best place to find URLs is on existing Web pages. Web browsers display the URL for the page you are currently viewing, and they can display the URL of a link if you point to the link with the mouse.
If you are writing an HTML document and you want to make a link to another document that is in the same directory, you can use a relative URL. The relative URL consists of just the name of the file. For example, to create a link to a file named "s1.html" in the same directory as the HTML document that you are writing, you could use
<a href="s1.html">Section 1</a>
There are also relative URLs for linking to files that are in other directories. Using relative URLs is a good idea, since if you use them, you can move a whole collection of files without changing any of the links between them (as long as you don't change the relative locations of the files).
When you type a URL into a Web browser, you can omit the "http://" at the beginning of the URL. However, in an <a> tag in an HTML document, the "http://" can only be omitted if the URL is a relative URL. For a normal URL, it is required.
You can add images to a Web page with the <img> tag. (This is a tag that has no matching closing tag.) The actual image must be stored in a separate file from the HTML document. The <img> tag has a required modifier, named src, to specify the URL of the image file. For most browsers, the image should be in one of the formats PNG (with a file name ending in ".png"), JPEG (with a file name ending in ".jpeg" or ".jpg"), or GIF (with a file name ending in ".gif"). Usually, the image is stored in the same place as the HTML document, and a relative URL -- that is, just the name of the image file -- is used to specify the image file.
The <img> tag also has several optional modifiers. It's a good idea to always include the height and width modifiers, which specify the size of the image in pixels. Some browsers handle images better if they know in advance how big they are. The align modifier can be used to affect the placement of the image: "align=right" will shove the image to the right edge of the page, and the text on the page will flow around the image; "align=left" works similarly. (Unfortunately, "align=center" doesn't have the meaning you would expect. Browsers treat images as if they are just big characters. Images can occur inside paragraphs, links, and headings, for example. Alignment values of center, top, and bottom are used to specify how the image should line up with other characters in a line of text: Should the baseline of the text be at the center, the top, or the bottom of the image? Alignment values of right and left were added to HTML later, but they are the most useful values. If you want an image centered on the page, put it inside a <p align=center> tag.)
For example, here is HTML code that will place an image from a file named figure1.png on the page.
<img src="figure1.png" align=right height=150 width=100>
The image is 100 pixels wide and 150 pixels high, and it will appear on the right edge of the page.
6.2.4 Applets on Web Pages
The main point of this whole discussion of HTML is to learn how to use applets on the Web. The <applet> tag can be used to add a Java applet to a Web page. This tag must have a matching </applet>. A required modifier named code gives the name of the compiled class file that contains the applet class. The modifiers height and width are required to specify the size of the applet, in pixels. If you want the applet to be centered on the page, you can put the applet in a paragraph with center alignment So, an applet tag to display an applet named HelloWorldApplet centered on a Web page would look like this:
<p align=center> <applet code="HelloWorldApplet.class" height=100 width=250> </applet> </p>
This assumes that the file HelloWorldApplet.class is located in the same directory with the HTML document. If this is not the case, you can use another modifier, codebase, to give the URL of the directory that contains the class file. The value of code itself is always just a class, not a URL.
If the applet uses other classes in addition to the applet class itself, then those class files must be in the same directory as the applet class (always assuming that your classes are all in the "default package"; see Subsection 2.6.4). If an applet requires more than one or two class files, it's a good idea to collect all the class files into a single jar file. Jar files are "archive files" which hold a number of smaller files. If your class files are in a jar archive, then you have to specify the name of the jar file in an archive modifier in the <applet> tag, as in
<applet code="HelloWorldApplet.class" archive="HelloWorld.jar" height=50...
I will have more to say about creating and using jar files at the end of this chapter.
Applets can use applet parameters to customize their behavior. Applet parameters are specified by using <param> tags, which can only occur between an <applet> tag and the closing </applet>. The param tag has required modifiers named name and value, and it takes the form
<param name="param-name" value="param-value">
The parameters are available to the applet when it runs. An applet can use the predefined method getParameter() to check for parameters specified in param tags. The getParameter() method has the following interface:
String getParameter(String paramName)
The parameter paramName corresponds to the param-name in a param tag. If the specified paramName actually occurs in one of the param tags, then getParameter(paramName) returns the associated param-value. If the specified paramName does not occur in any param tag, then getParameter(paramName) returns the value null. Parameter names are case-sensitive, so you cannot use "size" in the param tag and ask for "Size" in getParameter. The getParameter() method is often called in the applet's init() method. It will not work correctly in the applet's constructor, since it depends on information about the applet's environment that is not available when the constructor is called.
Here is an example of an applet tag with several params:
<applet code="ShowMessage.class" width=200 height=50>
<param name="message" value="Goodbye World!">
<param name="font" value="Serif">
<param name="size" value="36">
</applet>
The ShowMessage applet would presumably read these parameters in its init() method, which could go something like this:
String message; // Instance variable: message to be displayed.
String fontName; // Instance variable: font to use for display.
int fontSize; // Instance variable: size of the display font.
public void init() {
String value;
value = getParameter("message"); // Get message param, if any.
if (value == null)
message = "Hello World!"; // Default value, if no param is present.
else
message = value; // Value from PARAM tag.
value = getParameter("font");
if (value == null)
fontName = "SansSerif"; // Default value, if no param is present.
else
fontName = value;
value = getParameter("size");
try {
fontSize = Integer.parseInt(value); // Convert string to number.
}
catch (NumberFormatException e) {
fontSize = 20; // Default value, if no param is present, or if
} // the parameter value is not a legal integer.
.
.
.
Elsewhere in the applet, the instance variables message, fontName, and fontSize would be used to determine the message displayed by the applet and the appearance of that message. Note that the value returned by getParameter() is always a String. If the param represents a numerical value, the string must be converted into a number, as is done here for the size parameter.