Synopsys FPGA Compiler Interface Journal - Software Updates
Current Release - M1
Synthesis Library Updates for M1
Compiled Designware Libraries for M1
Utilities for M1
Older Release - XACT 5.
X
Synthesis Library Updates for M1
Compile Designware and Simulation Libraries for XACT 5.2.1
Utilities for XACT
M1:
Synthesis Library Updates for M1
Solution 6588 - A2.1i/XSI: Slew Rate specifications on Virtex IOBs are ignored during synthesis
Solution 7470 - A2.1i/XSI: Bidirectional I/O has extra inversion inferred (IOBUF_N)
Compiled Designware Libraries for M1
See
Solution 7000
and
Solution 1166
for more information on obtaining and installing compiled Designware libraries for M1.
Xilinx Alliance 2.1i/Synopsys 1998.02
Xilinx Alliance 2.1i/Synopsys 1997.08
Xilinx Alliance 1.5/Synopsys 1998.08
Xilinx Alliance 1.5/Synopsys 1998.02
Xilinx Alliance 1.5/Synopsys 1997.08
Xilinx Alliance 1.4/Synopsys 1998.02
Xilinx Alliance 1.4/Synopsys 1997.08
Xilinx Alliance 1.4/Synopsys 1997.01
Xilinx Alliance 1.4/Synopsys 3.5A
Xilinx M1.3/Synopsys 1997.08
Xilinx M1.3/Synopsys 1997.01
Xilinx M1.3/Synopsys 3.5A
Note: If the Designware library for your particular version of M1 and Synopsys is not listed above, please make a request to the
Xilinx Technical Support Hotline
.
Utilities for M1
Solution 4491 A1.5 XSI: Makeucf is a PERL utility that simplifies the creation of timespecs for FPGA Compiler users.
XACT:
Synthesis Library Updates for XACT 5.2.1
Solution 1708 XC4000E Synopsys Libraries: XC4000E -2.db files available for users of XSI 5.2.1 & Synopsys 3.3b and above
Solution 1709 XC3000 Synopsys Libraries: XC3100A -1 and -09.db files available for users of XSI 5.2.1 & Synopsys 3.3b and above
Solution 1455 XSI 5.2.1 .db files for synthesizing 5210-4, 5215-5, and 5215-6
Compiled XBLOX/Designware and Simulation libraries for XACT 5.2.1
See
Solution 1166
for more information on obtaining and installing compiled Designware and Simulation libraries for XACT.
XACT 5.2.1/Synopsys 3.5A
XACT 5.2.1/Synopsys 3.4B
XACT 5.2.1/Synopsys 3.4A
XACT 5.2.1/Synopsys 3.3B
Utilities for XACT 5.2.1
Solution 1207 Addtnm and maketnm are PERL script utilities which allow users to add TNMs (Time NaMes) to an .xnf or .xff file so that creating specific timing constraints in a .cst file is much easier.
Solution 1201 XBLOXGEN is a CSH utility which will create XBLOX modules which can be instantiated into you Verilog or VHDL code.