The Configuration Problem Solver
Related Solution Records
FPGA should be active.
Solution 158: "FPGA Configuration: DONE goes High but Output never become Active."
Solution 4773: "FPGA Configuration: SyncToDone must apply to all devices in Daisy-Chain."
Solution 3631: "FPGA Configuration: Unconnected MODE Pins may cause FPGAs to not reconfigure."
Solution 2748: "FPGA Configuration: All I/O (including DONE) Tristate during configuration."
Solution 2427: "Hardware Debugger: Polarity of Reset signal is active Low."
HISTORY
Family:
XC4000
Mode:
Synchronous Peripheral
DONE:
HIGH
LDC:
HIGH
