The Configuration Problem Solver
CONCLUSION
Configuration is not being performed on the device.
The following are several typical reasons why an FPGA would ignore attempts to configure it. (1) The Mode Pins are set incorrectly. (2) The DIN Pin is not connected to the board correctly. (3) The CCLK is not transitioning or is not correctly connected. (4) Either the RESET Pin or the PWRDN Pin is Low. See also related answers. Related Answers |
HISTORY |
Family: XC3000 |
Mode: Slave Serial |
D/P: LOW |
INIT: HIGH |
LDC: LOW |
DOUT: NO |