Placing Multiple Title Blocks

Capture places a default title block at the lower right corner of every schematic page. In addition, you may place any number of custom title blocks at any location on the schematic page. Custom title blocks, unlike default title blocks, do not include information from the design template, but you can define and place visible properties on the title block.

Information placed as properties in custom title blocks will not appear in reports or netlists created by Capture; only the information in the default title block will be used.

To place custom title blocks

1. From the Place menu, choose the Title Block command. The Place Title Block dialog box appears.
2. In the Symbol text box, enter the name—you can use the standard "*" and "?" wildcard characters. Capture scans the selected libraries and lists all symbols that match the name or wildcard.
3. If the title block name is not listed, see Searching for a part in the libraries for further information.
4. Click on a title block name in the list for a preview, or double-click on it to place the title block. You can also select the title block name and click OK to place the title block.