Subject: Re: [sv-cc] Disables and DPI interaction
From: Stickley, John (john_stickley@mentorg.com)
Date: Mon Oct 20 2003 - 08:10:42 PDT
Joao,
If you don't mind ...
Joao Geada wrote:
> Disable usage notes:
> In Verilog, disables were primarily used to effect exception control jumps.
> (note: there were other uses of disable, but such uses were rarer)
> In SV 3.1 that purpose of disable is largely superceded by the provision of
> additional control constructs (break, continue, return, etc);
> However, due to all the testbench process control constructs it is possible
> that disables will be used to control "transactions" within the testbench.
... I was wondering if you can clarify what you meant by this last statement.
Thanks,
-- johnS
__
______ | \
______________________/ \__ / \
\ H Dome ___/ |
John Stickley E | a __ ___/ / \____
Principal Engineer l | l | \ /
Verification Solutions Group | f | \/ ____
Mentor Graphics Corp. - MED C \ -- / /
17 E. Cedar Place a \ __/ / /
Ramsey, NJ 07446 p | / ___/
| / /
mailto:John_Stickley@mentor.com \ /
Phone: (201)818-2585 \ /
---------
This archive was generated by hypermail 2b28 : Mon Oct 20 2003 - 08:12:25 PDT