Subject: RE: [sv-cc] Meeting Minutes: SV-CC Weekly Meeting - 10-22-03
From: Joao Geada (Joao.Geada@synopsys.com)
Date: Thu Dec 04 2003 - 07:11:44 PST
Michael,
the tool I use, Poseidon UML (www.gentelware.com), knows how to do this itself.
The main issue we're exploring is what Framemaker does with these SVG diagrams
when it loads them. The attempts by David Smith appear to indicate that Frame
converts SVG diagrams to bitmaps during the import process, defeating the purpose.
Basically what we're trying to avoid is the low-quality diagrams that have
appeared in some of the VHPI drafts, where some of the diagrams are not
legible.
Joao
==============================================================================
Joao Geada, PhD Principal Engineer Verif Tech Group
Synopsys, Inc TEL: (508) 263-8083
377 Simarano Drive, Suite 300, FAX: (508) 263-8069
Marlboro, MA 01752, USA
==============================================================================
> -----Original Message-----
> From: owner-sv-cc@eda.org [mailto:owner-sv-cc@eda.org]On Behalf Of
> Michael Rohleder
> Sent: Thursday, December 04, 2003 5:17 AM
> To: sv-cc@eda.org
> Subject: Re: [sv-cc] Meeting Minutes: SV-CC Weekly Meeting - 10-22-03
>
>
> Hi all,
>
> I did a short google to find some tools to convert XMI into SVG, which AFAIK could be used to generate a graphic for
> Frame ... Have
> a look at
> http://www.cs.ucl.ac.uk/staff/c.nentwich/Box/
>
> Joao, does this help ?
>
> -Michael
>
> "Stickley, John" wrote:
>
> > - JohnS asked if we still have plans to convert VPI model
> > to UML.
> >
> > - Joao said it is an issue of getting diagrams into Frame.
> > - Francoise said they already have a Rational Rose entry of
> > all of Verilog 2001 VPI in UML but it is just a question of
> > getting the RR format converted to diagrams suitable for
> > FrameMaker.
> >
> > - There is a standard interchange format for UML diagrams
> > based on XML. A lot of UML tools can import this XML
> > representation of UML.
> >
> > - They have also been using the checking capabilities of the
> > UML tools to verify some of the correctness of the model.
>
> --
>
> NOTE: The content of this message may contain personal views
> which are not neccessarily the views of Motorola, unless specifically stated.
>
> ___________________________________________________
> | |
> _ | Michael Rohleder Tel: +49-89-92103-259 | _
> / )| Software Technologist Fax: +49-89-92103-680 |( \
> / / | Motorola, Semiconductor Products, System Design | \ \
> _( (_ | _ Schatzbogen 7, D-81829 Munich, Germany _ | _) )_
> (((\ \>|_/ > < \_|</ /)))
> (\\\\ \_/ / mailto:Michael.Rohleder@motorola.com \ \_/ ////)
> \ /_______________________________________________\ /
> \ _/ \_ /
> / / \ \
>
> The information contained in this email has been classified as:
> Motorola General Business Information (x)
> Motorola Internal Use Only ( )
> Motorola Confidential Proprietary ( )
>
>
> *** This note may contain Motorola Confidential Proprietary or
> Motorola Internal Use Only Information and is intended to be
> reviewed by only the individual or organization named above.
> If you are not the intended recipient or an authorized representative
> of the intended recipient, you are hereby notified that any review,
> dissemination or copying of this email and its attachments, if any,
> or the information contained herein is prohibited. If you have received
> this email in error, please immediately notify the sender by
> return email and delete this email from your system.
> Thank you! ***
>
>
This archive was generated by hypermail 2b28 : Thu Dec 04 2003 - 07:13:09 PST