Subject: RE: [sv-cc] Reader VPI defs/routines to be added to vpi_user.h
From: Bassam Tabbara (bassam@novas.com)
Date: Thu Jan 29 2004 - 13:13:02 PST
Sure. Thanks Joao, ok I see that now in the header, but may be some more
redundancy is in order ? (see the ** ... **), just in case the header is not
obvious or is missed.
Annex K: sv_vpi_user.h
(normative)
sv_vpi_user.h
/***************************************************************************
* sv_vpi_user.h
*
* Accellera SystemVerilog VPI extensions. <<<<<< I see it now...
*
* This file contains the constant definitions, structure definitions, and
* routine declarations used by the Verilog PLI procedural interface VPI
* access routines ** added in SystemVerilog **.
*
**************************************************************************/
Thx.
-Bassam.
P.S. I think I still owe a "glossary" for Read VPI there are likely very few
terms that need description, but I will send out a few defs.
-- Dr. Bassam Tabbara Technical Manager, R&D Novas Software, Inc.http://www.novas.com (408) 467-7893
> -----Original Message----- > From: Joao Geada [mailto:Joao.Geada@synopsys.com] > Sent: Thursday, January 29, 2004 12:35 PM > To: bassam@novas.com > Cc: Sv-Cc > Subject: RE: [sv-cc] Reader VPI defs/routines to be added to > vpi_user.h > > > Bassam, > > Thanks for the data and the feedback. > I didn't think it was necessary to belabor the point that > this was added in SystemVerilog because the *entire* file is > new and contains *only* the system verilog specific stuff. > > Joao > ============================================================== > ================ > Joao Geada, PhD Principal Engineer > Verif Tech Group > Synopsys, Inc > TEL: (508) 263-8083 > 377 Simarano Drive, Suite 300, > FAX: (508) 263-8069 > Marlboro, MA 01752, USA > ============================================================== > ================ >
This archive was generated by hypermail 2b28 : Thu Jan 29 2004 - 13:17:49 PST