Subject: [sv-cc] RE: [sv-ec] Draft 5 Changes Review Request
From: Warmke, Doug (doug_warmke@mentorg.com)
Date: Tue Feb 24 2004 - 11:35:15 PST
David,
LRM-217 looks good.
In section E.7.9, don't forget to bold "bit" and "logic" in the new
text.
Our last errata wasn't handled, probably because it came in a separate
email later. It won't be a big deal if you can't get it in draft5. But
if you
can, that would be good:
ADD the following to both Sections E.10.3.2 and F.1.
It should be the final line in the existing comment
block shown below:
" * Selected part's range in both arrays will be [w+i-1:i]."
/*
* functions for part select
*
* a narrow (<=32 bits) part select is copied between
* the implementation representation and a single chunk of
* canonical representation
* Normalized ranges and indexing [n-1:0] are used for both arrays:
* the array in the implementation representation and the canonical
array.
*
* s=source, d=destination, i=starting bit index, w=width
* like for variable part selects; limitations: w <= 32.
* Selected part's range in both arrays will be [w+i-1:i].
*/
Thanks for everything, David.
-Doug
-----Original Message-----
From: owner-sv-ec@server.eda.org [mailto:owner-sv-ec@server.eda.org] On
Behalf Of David W. Smith
Sent: Thursday, February 19, 2004 5:36 PM
To: sv-ac@server.eda.org; sv-bc@server.eda.org; sv-cc@server.eda.org;
sv-ec@server.eda.org
Subject: [sv-ec] Draft 5 Changes Review Request
Importance: High
Greetings,
I have posted the LRM Change requests for all changes that have been
sent to me for Draft 5. I would appreciate it if the people in the chart
below (and attached PDF) would please verify their changes are correct.
Please note that the changes may not have been done exactly as
requested. Also, there are a number of cases where questions were asked
with no solution. I have not responded to these. Additionally, there are
a number of suggested changes that may not have been implemented after
consultation with the SV Champions.
I would request that only corrections to these changes be sent to me.
Any additional changes or incorporation of changes that were not
implemented I would like to see sent to the respective committees and
handled there.
I will be sending the files to Stu so that he can get started. Please
send me your corrections by Monday (if at all possible).
Regards
David
Arturo Salz
LRM-237
LRM-251
LRM-252
LRM-253
LRM-254
LRM-255
LRM-256
LRM-259
Bassam Tabbara
LRM-257
Brad Pierce
LRM-208
LRM-220
LRM-223
LRM-225
LRM-226
LRM-227
LRM-230
LRM-236
LRM-239
LRM-240
LRM-241
LRM-242
LRM-243
LRM-246
LRM-247
LRM-248
LRM-249
LRM-250
LRM-261
LRM-264
Dave Rich
LRM-201
LRM-203
LRM-215
LRM-228
LRM-244
LRM-245
David Smith
LRM-204
LRM-205
LRM-234
LRM-235
Doug Warmke
LRM-217
Francoise Martinolle
LRM-233
Jamie LaFlamme
LRM-207
LRM-216
LRM-221
Joao Geada
LRM-258
John Havlicek
LRM-211
LRM-260
Mark Hartoog
LRM-224
Matthew Maidment
LRM-222
Michael Burns
LRM-212
Michael Rohleder
LRM-218
Neil Korpusik
LRM-262
Peter Flake
LRM-232
Ray Ryan
LRM-202
LRM-229
LRM-263
Rishiyur S. Nikhil
LRM-213
LRM-214
LRM-219
Stefen Boyd
LRM-265
Surrendra Dudani
LRM-209
LRM-210
LRM-231
LRM-238
David W. Smith
Synopsys Scientist
Synopsys, Inc.
Synopsys Technology Park
2025 NW Cornelius Pass Road
Hillsboro, OR 97124
Voice: 503.547.6467
Main: 503.547.6000
FAX: 503.547.6906
Email: david.smith@synopsys.com
http://www.synopsys.com <http://www.synopsys.com/>
This archive was generated by hypermail 2b28 : Tue Feb 24 2004 - 11:40:32 PST