RE: [POSSIBLE VIRUS:###] [sv-cc] [Fwd: P1800/draft5 sv_vpi_user.h file]

Charles,

The file compiled fine in my tree.

Regards,
Doug 

> -----Original Message-----
> From: owner-sv-cc@eda.org [mailto:owner-sv-cc@eda.org] On 
> Behalf Of Charles Dawson
> Sent: Wednesday, June 01, 2005 8:49 AM
> To: SV-CC
> Subject: [POSSIBLE VIRUS:###] [sv-cc] [Fwd: P1800/draft5 
> sv_vpi_user.h file]
> 
> Hi All,
> 
> I suggest trying this out ASAP to make sure it has not obvious
> syntax errors, ...etc.
> 
> Thanks.
> 
>    -Chas
> 
> 
> -------- Original Message --------
> Subject: P1800/draft5 sv_vpi_user.h file
> Date: Wed, 1 Jun 2005 08:30:18 -0700
> From: "Stuart Sutherland" <stuart@sutherland-hdl.com>
> Reply-To: <stuart@sutherland-hdl.com>
> Organization: Sutherland HDL, Inc.
> To: <chas>
> 
> Chas.,
> 
> I have attached a .h file with what is in the final version 
> P1800/draft5
> Annex I.  Any struck-through lines have been deleted from 
> this file, so it
> should be good-to-go.  Please forward this to any SV-CC 
> committee members
> that may wish to test the file.  Testing should be done ASAP. 
>  If any errors
> are found, we can ask the working group at tomorrow's meeting 
> to allow me to
> make corrections and regenerate draft 5.
> 
> Note that the attached file has Unix style carriage returns.  
> In case this
> does not e-mail well, I have also attached a zip file version 
> (which will
> probably convert the file to DOS style returns).  I can 
> create a tar file
> version if needed, but have to reboot my laptop into Linux to 
> do so, and
> then reboot in Windows to e-mail it (and to continue editing 
> the P1364 LRM.
> 
> Stu
> ~~~~~~~~~~~~~~~~~~~~~~~~~
> Stuart Sutherland
> stuart@sutherland-hdl.com
> +1-503-692-0898
> 
> 
> 
> -- 
> Charles Dawson
> Senior Engineering Manager
> NC-Verilog Team
> Cadence Design Systems, Inc.
> 270 Billerica Road
> Chelmsford, MA  01824
> (978) 262 - 6273
> chas@cadence.com
> 
>