RE: [sv-cc] Parameters in VPI

Thank you for Your response, Jim.
 I will check this idea.
 
Radek
 
  _____

From: Jim Vellenga [mailto:vellenga@cadence.com]
Sent: Thursday, July 05, 2012 2:44 PM
To: Radoslaw Nawrot
Cc: sv-cc@eda.org
Subject: RE: [sv-cc] Parameters in VPI

Radek,

As far as I can tell, the SV-CC has not yet addressed this issue. I have
filed your question as a new Mantis item #4238.

I believe there's a bit of information available already. One could ask for
the vpiTypespec of the parameter and use that to determine the structure.
However, I don't know of any way using VPI from the current standard to
descend to the elements or members of that parameter. To find the
corresponding values (which will not change during simulation), one could in
principle descend the corresponding typespec while sat the same time
traversing the operands of the assignment pattern on the right-hand side.

Given this, I believe an application could work around the limitation of not
being able to iterate over the elements and members of an aggregate
parameter type. However, a problem that you did not explicitly mention is
how to represent one of those members or elements in VPI when it shows up as
an expression in the SystemVerilog source in a form such as P[0] or P.a. (I
believe that the standard allows this.) I do have some ideas about what to
do in such a case, but I expect the whole committee really should talk about
it first.

Thank you for bringing this to our attention.

Jim Vellenga

From: owner-sv-cc@eda.org [mailto:owner-sv-cc@eda.org] On Behalf Of Radoslaw
Nawrot
Sent: Wednesday, 4 Jul 2012 7:36 AM
To: sv-cc@eda.org
Subject: [sv-cc] Parameters in VPI

Hi,

I have few questions about parameters in vpi.

1.) If I use parameter array i.e parameter int P[4]='{1,2,3,4}

       should I receive type vpiParameter or vpiArrayVar (probably no
because is parameter not variable) or mayby it should be new type
vpiParameterArray

2.) What about selection from such parameter

        example :

            parameter [7:0] P =8'h99;

    P[1] shoudl be vpiParameter or vpiBitSelect ?

3.) If I have struct param :

i.e typedef struct {int a,b; int arr[2];} T;
  parameter T P ='{1,2,'{3,4}};

4.) If I want to receive parameter array element , should I iterate via
vpiParameter. If yes than what If I want to receive one register from
paramter (vide question 2) , should I also iterate via vpiParameter?

Can I iterate via vpiMember from that parameter?

If yes should I receive vpiParameter or i.e vpiIntVar,.. vpiArrayVar

Regards,

Radek

 
Received on Mon Jul 9 01:33:08 2012