The Configuration Problem Solver
Address Pins don't start at 000000h.
To configure in the Master Parallel Mode the Mode Pins <M2:M1:M0> must be set to <100> for Parallel Up Mode, and <110> for Parallel Down Mode. In the Parallel Up Mode the Address lines start at <00000h> and count up. In the Parallel Down Mode the Address lines start at <1FFFFh> and count down. Be certain that the PROM data was stored properly for the selected MODE. |
HISTORY |
Family: XC3000 |
Mode: Master Parallel |
D/P: LOW |
INIT: HIGH |
ADD: YES |
LDC: LOW |
DOUT: NO |