Clause 18 repeatedly uses the phrase "evaluation attempt" or (at least once) "attempt". 18.5 says that "An attempted evaluation of a sequence is a search for a match of the sequence beginning at a particular clock tick." and then adds more detail about what constitutes a match. Is that enough of a definition? Regards, Jim V. --------------------------------------------------------- James H. Vellenga 978-262-6381 Engineering Director (FAX) 978-262-6636 Cadence Design Systems, Inc. vellenga@cadence.com 270 Billerica Rd Chelmsford, MA 01824-4179 "We all work with partial information." ---------------------------------------------------------- ] -----Original Message----- ] From: owner-sv-cc@eda.org [mailto:owner-sv-cc@eda.org] On ] Behalf Of Charlie Dawson ] Sent: Thursday, April 21, 2005 1:53 PM ] To: sv-ac@eda.org ] Cc: SV-CC ] Subject: [Fwd: RE: [sv-cc] 29 - uses the term "attempt"] ] ] Hi SV-AC, ] ] Are these terms defined? If not, can we get them defined? Once ] defined, I need to know where so the SV-CC can add xrefs. ] ] Thanks, ] ] -Chas ] ] ] -------- Original Message -------- ] Subject: RE: [sv-cc] 29 - uses the term "attempt" ] Date: Thu, 21 Apr 2005 10:49:29 -0700 ] From: "Bassam Tabbara" <Bassam@novas.com> ] To: <chas>, "SV-CC" <sv-cc@eda.org> ] ] Hi Charles, Chapter 18 (Assertions) uses it ... Attempt refers to an ] evaluation attempt which can have threads (different evaluation paths ] ...) within. Since it is not really defined, I would say both ] "attempt" ] and "thread" are worthy terms for the glossary (for SV-AC), right now ] only "assertion" is there ... ] ] Thx. ] -Bassam. ] ] -- ] Dr. Bassam Tabbara ] Architect, R&D ] Novas Software Inc. ] (408) 467-7893 ] ] -----Original Message----- ] From: owner-sv-cc@eda.org [mailto:owner-sv-cc@eda.org] On Behalf Of ] Charles Dawson ] Sent: Thursday, April 21, 2005 10:11 AM ] To: SV-CC ] Subject: [sv-cc] 29 - uses the term "attempt" ] ] Hi All, ] ] Section 29 uses the term "attempt" but does not define it. Is this ] defined elsewhere? If so, anyone know where that would be? ] ] -Chas ] ] -- ] Charles Dawson ] Senior Engineering Manager ] NC-Verilog Team ] Cadence Design Systems, Inc. ] 270 Billerica Road ] Chelmsford, MA 01824 ] (978) 262 - 6273 ] chas@cadence.com ] ] ] ] ] ] -- ] Charles Dawson ] Senior Engineering Manager ] NC-Verilog Team ] Cadence Design Systems, Inc. ] 270 Billerica Road ] Chelmsford, MA 01824 ] (978) 262 - 6273 ] chas@cadence.com ] ] ] ]Received on Thu Apr 21 12:29:25 2005
This archive was generated by hypermail 2.1.8 : Thu Apr 21 2005 - 12:29:58 PDT