|
|
|
|
|
|
Xilinx Answer #7092 : HW-130: Version 4.5 and future versions do not suport DOS or Workstation platforms.
Xilinx Answer #5956 : HW-130-CAL : What is the Calibration Adapter? Do you normally need it?
Xilinx Answer #5905 : HW-130: Version 4.5/4.61 Supports the operating systems Win95, Win98, and WinNT
Xilinx Answer #4007 : HW-130/Third party programmers (such as DATA IO, BP): Supported file formats .mcs, .exo, .tek but not .bit
Xilinx Answer #3160 : HW130 v4.1.0, 9572: Verify failures on 9572-PC44 devices
Xilinx Answer #2519 : Programmers: hw-130 Adapters and supported devices.
Xilinx Answer #2498 : HW-130: Cannot reconfigure programmer
Xilinx Answer #2136 : HW-130: Installation tips for SunOS workstation platforms
Xilinx Answer #2129 : HW-130: programmer displays "HW-133-PG84" when TQ100 adapter is used.
Xilinx Answer #2045 : HW-130 programmer support for 9500 series devices
Xilinx Answer #1824 : ** HW-130: Programming 73144 yields "Warning! Programming Error at Address XXXX"
Xilinx Answer #1602 : HW-130: What adapters do I need to program a 9500?
Xilinx Answer #1417 : Programmers: HW-130: Are the HW-112 (PP2) adapters compatible with the HW-130 Programmer?
Xilinx Answer #1415 : **Obsolete Solution**: Programmers: HW-130: PROLINK/HW-120: Manufacturer and product code / product i.d. errors on 7300 devices
Xilinx Answer #1266 : **Obsolete Solution**: Programmers: HW-130: Verification Failure For a 17128D and 17256D
Xilinx Answer #1144 : **Obsolete Solution**: Programmers: HW-130: Can't find programmer or system crash problem on Toshiba laptops
Xilinx Answer #1006 : Programmers: HW-130: "Device Manufacturer code error"
Xilinx Answer #1004 : **Obsolete Solution**: Programmers: HW-130: The 7372 is non-functional if the security bit is programmed
Xilinx Answer #961 : Programmers: HW-130: Are the HW-120 adapters compatible with the HW-130 Programmer?
Xilinx Answer #926 : Programmers: HW-130: Installation and Debugging tips (PC platforms)
Xilinx Answer #793 : Programmers: HW-130: Programmer does not accept .bit file format
Xilinx Answer #758 : Programmers: HW-130: Programmer flashes red FAIL light with HW-12x (7300) adapter in place