|
|
|
|
|
|
Xilinx Answer #7480 : Floorplanner 2.1is1 - Locked pin in UCF file are ignored if design is floorplanned
Xilinx Answer #6711 : 2.1i: Floorpanner: Floorplanner does not remove 'constrained' blocks when 'area constraints' is used
Xilinx Answer #6702 : 1.5i/2.1i: FPGA Editor/FloorPlanner: XPrinter driver files (*.drv) have incorrect permissions on HP-UX 10.2
Xilinx Answer #6564 : 2.1i: Floorplanner showing unbonded power and ground IOB pins in hierarchy window
Xilinx Answer #6516 : 2.1i: Floorplanner: Block RAM does not display correctly in bottom left and right hand corners of Floorplanner window on Solaris
Xilinx Answer #6511 : 2.1i: Floorplanner - A "shadow" is left after a refresh when dragging component
Xilinx Answer #6510 : 2.1i: Floorplanner - Floorplanner allows illegal BUFG placement.
Xilinx Answer #6509 : 2.1i: Floorplanner - BELs that have been floorplanned to Area Constraints are not removed from Hierarchy Window
Xilinx Answer #6508 : 2.1i: Floorplanner - Does not support Win 95/98/NT file names that contain spaces
Xilinx Answer #6361 : 2.1i: Floorplanner: The horizontal flip does not flip but shifts to the right one CLB. HP
Xilinx Answer #6360 : 2.1i: Floorplanner: When constraints are placed over boundries, placement is not disabled.
Xilinx Answer #6358 : 2.1i: Floorplanner (4kxl): ERROR:x4kma:387 - Unable to obey design constraints which require...
Xilinx Answer #6320 : M1.5/2.1i: Floorplanner: Unable to open fnf file F:\path_to\_fplan.fnf for reading
Xilinx Answer #6319 : 2.1i Floorplanner: It writes out bad constraints for BEL PAD
Xilinx Answer #6164 : 2.1i: Floorplanner: The IBUFG placment is not verified by DRC check
Xilinx Answer #6159 : 2.1i Floorplanner: The Shortcuts for 'Select Loads', 'Select Source', 'Zoom to Box', 'Zoom to Part' and Expand/Collapse Hierarchy do not work.
Xilinx Answer #5106 : 2.1i Floorplanner - PROHIBIT constraints are not supported.
Xilinx Answer #5105 : M1.5/2.1i: Floorplanner does not support hard macros (.nmc)
Xilinx Answer #4696 : M1.x/2.1i: FLOORPLANNER- STARTUP, READBACK, of BSCAN symbols are not shown