The Configuration Problem Solver

---

Related Solution Records

FPGA should be active.

• Solution 5024: "FPGA Configuration: DONE is HIgh, device doesn't operate."
• Solution 4773: "FPGA Configuration: SyncToDone must apply to all devices in Daisy-Chain."
• Solution 3703: "FPGA Configuration: XC4000XL internal signal stuck Low."
• Solution 3631: "FPGA Configuration: Unconnected MODE pins may cause FPGAs to not reconfigure."
• Solution 2748: "FPGA Configuration: All I/O (including DONE) Tristate during configuration."
• Solution 2427: "Hardware Debugger: Polarity of Reset signal is active Low."
• Solution 158: "FPGA Configuration: DONE goes High but Output never become Active."