The Configuration Problem Solver
Related Solution Records
A DataFrame Error has been detected.
Solution 4619: "FPGA Configuration: INIT goes low on a certain frame, possible causes."
Solution 2645: "FPGA Configuration: INIT goes low unrelated to frame error."
Solution 2098: "FPGA Configuration: What are the Thresholds for Configuration Pins?"
Solution 1519: "FPGA Configuration: What Threshold soes CCLK use for 5 Volt FPGAs?"
Solution 1469: "FPGA Configuration: XChecker: `Error 264: DONE signal did not go high.'"
Solution 1385: "XCHECKER 5.2.1: Error 265: INIT signal is low."
Solution 492: "FPGA Configuration: Minimum pulse width for PROG to reconfigure an FPGA."
Solution 465: "PROMs: 8-pin sockets w/built-in capacitors can cause multi-prom config..."
Solution 212: "FPGA Configuration: FAST CCLK causes dataframe error..."
Solution 181: "FPGA Configuration: Shifting serially from PROM file..."
Solution 169: "FPGA Configuration: Excessive loading on CCLK may cause frame error."
Solution 136: "PROMs: AT&T flash proms cannot fast configure an XC5200 device."
HISTORY
Family:
XC5200
Mode:
Master Serial
DONE:
LOW
INIT:
LOW
