|
|
|
|
|
|
Xilinx Answer #8301 : Hardware Debugger: Can you download to an XESS demo-board using the Xilinx Parallel Cable
Xilinx Answer #7120 : Hardware Debugger M1/M2: Xchecker cannot bring D/P low to reconfigure the device. Reset the Target board to continue.
Xilinx Answer #6545 : Hardware Debugger 1.5/2.1: Parallel Cable toggles PROG after Download.
Xilinx Answer #6191 : M1.5/M1.5i Device Download/Lab Install: Hardware Debugger: Error: The ordinal 6453 could not be located in library mfc42.dll
Xilinx Answer #5928 : M1.5i: Lab Install of Hardware Debugger, Jtag Programmer, Prom File Formatter: Tools don't start
Xilinx Answer #4834 : Hardware Debugger A/F1.5: Horizontal Scroll bar in Display Signal Dialog is permanently disabled
Xilinx Answer #3701 : Hardware Debugger: Configuring FPGA with Parallel Cable fails, Serial Cable works.
Xilinx Answer #3672 : Hardware Debugger: Readback verification disabled in XC5200 designs...
Xilinx Answer #3536 : M1.4 hwdebugr: Hardware Debugger does not load FPGA bit files successfully in Lab Install environment.
Xilinx Answer #3417 : CPLD, M1.3/M1.4: How to run the JTAG Programmer, Hardware Debugger and PROM File Formatter as a stand alone?
Xilinx Answer #3403 : A1.4/F1.4: Some figures in the 1.4 Hardware User Guide are incorrect
Xilinx Answer #3232 : Hardware Debugger, M1.3 & M1.4 Lab Install, Error Baspm:Baspmdllm 174 & 187 dll open of library libx4xbs.dll
Xilinx Answer #3137 : Hardware Debugger M1.3: FATAL_ERROR:baspm:baspmdlm.c:187:1.18 - dll open failed...
Xilinx Answer #3106 : Hardware Debugger M1_3.7: Is XC5200 supported?
Xilinx Answer #3068 : Hardware Debugger M1.4: Readback Capture displays wrong data.
Xilinx Answer #3061 : Hardware Debugger M1_3.7: Stand alone download and readback software.
Xilinx Answer #3052 : Hardware Debugger M1_3.7: XCHECKER Self Check Fails in Windows 95 & NT...
Xilinx Answer #2803 : M1.3.7 Hardware Debugger fails during Readback/Verify on PC.
Xilinx Answer #2755 : Hardware Debugger 1.4: ld.so.1: hwdebugr: fatal: libbascd.so: can't open file: errno=2
Xilinx Answer #2610 : Hardware Debugger M1.2: FATAL_ERROR:baspm:baspmdlm.c:174:1.17
Xilinx Answer #2566 : Hardware User Guide M1: Incorrectly refers to litefpga design.
Xilinx Answer #2532 : Hardware Debugger: Current design does not have RDBACK block connected.
Xilinx Answer #2473 : Hardware Debugger: Printing and Print Preview causes Illegal Instruction or Application Error
Xilinx Answer #2472 : Hardware Debugger: Setting up printer on Unix Workstations
Xilinx Answer #2444 : Hardware Debugger 6.0.1/M1: What points can I probe during in-circuit debugging/readback?
Xilinx Answer #2427 : Hardware Debugger: Polarity of Reset signal is active low.
Xilinx Answer #2357 : Hardware Debugger M1.3: Console command "port auto" doesn't work on win95 and NT4.0
Xilinx Answer #2356 : Hardware Debugger M1: Can not communicate with non-standard port names
Xilinx Answer #2355 : Hardware Debugger M1.3: Available signals list do not follow bit order.
Xilinx Answer #2353 : Hardware Debugger M1.3, M1.4 :Hardware debugger features, eg download, not available on command line
Xilinx Answer #2351 : Hardware Debugger M1.3: "Need to define some signals to display" from Pulse RESET.
Xilinx Answer #2350 : Hardware Debugger M1: Changing the color of the wavforms in the waveform window
Xilinx Answer #2347 : Hardware Debugger M1: Missing newline charactor when reading UNIX macros in Win95 or WinNT4.0
Xilinx Answer #2346 : Hardware Debugger M1.3: "Signal List is Empty" when Displaying signals from Console.
Xilinx Answer #2340 : Hardware Debugger M1: No popup-menu for the console window.
Xilinx Answer #2335 : Hardware Debugger M1.3: Cable Self Check fails or doesn't run specified number of cycles.
Xilinx Answer #2323 : Hardware Debugger M1.3: Uppercase MACRO commands are invalid.
Xilinx Answer #2322 : Hardware Debugger M1.3: Display Signals window displays all "tied" signals.
Xilinx Answer #2313 : Hardware Debugger M1.3: Waveform Signal Display window scrolls do not function properly.
Xilinx Answer #2310 : Hardware Debugger M1.3: Debug operations do not affect target board.
Xilinx Answer #2300 : Hardware Debugger M1.3: DEBUG menu commands not executing.
Xilinx Answer #2293 : Hardware Debugger M1.3: Cannot print Macro files.
Xilinx Answer #2286 : Hardware Debugger M1.3: Download, Verify, and Debug menu commands are not executed.
Xilinx Answer #2271 : Hardware Debugger M1.3: Verify Bitstream finds bits mistched.
Xilinx Answer #2165 : Hardware Debugger 6.0.1: Message - Cannot get the startup directory.
Xilinx Answer #2142 : Hardware Debugger 6.0.1: .ll file not found
Xilinx Answer #1873 : Hardware Debugger Cannot Communicate With HP-10.x OS Serial Port
Xilinx Answer #1679 : Checking the Hardware and software requirement on Workstation and PC.
Xilinx Answer #1543 : Hardware Debugger 6.0.1: Parallel download cable is not supported.
Xilinx Answer #1432 : HARDWARE DEBUGGER: Many internal signals cannot be selected
Xilinx Answer #1322 : Hardware debugger: Incorrect cable specification given.
Xilinx Answer #966 : Hardware Debugger 6.0.1: Error Message: Cannot find TEMP directory
Xilinx Answer #943 : Hardware Debugger 6.0.1: Verification yields "Part type "?" is not defined in 'partlist.xct'
Xilinx Answer #855 : Hardware Debugger 6.0.1: Only 3 characters show when displaying # of clocks applied before first snapshot
Xilinx Answer #854 : Hardware Debugger 6.0.1: Hardware Debugger may issue an EMM386 error or hang on invocation.
Xilinx Answer #853 : Hardware Debugger 6.0.1: Help button in the New Group Name dialog does not invoke help.
Xilinx Answer #852 : Hardware Debugger 6.0.1: Text waveforms cannot be printed from the Hardware Debugger.
Xilinx Answer #851 : Hardware Debugger 6.0.1: "Save Readback" in the File menu is de-activated when a waveform is iconized.
Xilinx Answer #850 : Hardware Debugger 6.0.1: 1st readback may fail after a verify performed in the middle of several readbacks
Xilinx Answer #849 : Hardware Debugger 6.0.1: The Hardware Debugger cannot readback at 9600 baud on some machines.
Xilinx Answer #848 : Hardware Debugger 6.0.1: Cannot download using the Hardware Debugger if running from an executable CDROM.
Xilinx Answer #847 : Hardware Debugger 6.0.1: Textually saved waveforms cannot be re-opened into the Hardware Debugger.
Xilinx Answer #846 : Hardware Debugger 6.0.1: A readback text file (.rdb) of 0 bytes will be created if not enough disk space
Xilinx Answer #845 : Hardware Debugger 6.0.1: More than 500 snapshots will not be displayed.
Xilinx Answer #844 : Hardware Debugger 6.0.1: Console and macro windows cannot be printed from the Hardware Debugger.
Xilinx Answer #843 : Hardware Debugger 6.0.1: Clicking Run macro toolbar icon generates an error if a macro is not in focus.
Xilinx Answer #842 : Hardware Debugger 6.0.1: Printing only prints the currently displayed waveform portions.
Xilinx Answer #841 : Hardware Debugger 6.0.1: Non-consecutive lines in the Console window cannot be selected using the CTRL key
Xilinx Answer #840 : Hardware Debugger 6.0.1: When a macro is saved, invalid macro commands are not flagged.
Xilinx Answer #839 : Hardware Debugger 6.0.1: Once a macro has been issued, there is no way to interrupt it.
Xilinx Answer #837 : Hardware Debugger 6.0.1: Selecting File->Print without a printer installed gives an internal warning
Xilinx Answer #836 : Hardware Debugger 6.0.1: Clicking No in Press enter to Start Readback dialog shows FailedReadback message
Xilinx Answer #835 : Hardware Debugger 6.0.1: Timeout After X Seconds option only for External triggers.
Xilinx Answer #834 : Hardware Debugger 6.0.1: Nets split during implementation are shown as split nets in available signals list
Xilinx Answer #833 : Hardware Debugger 6.0.1: Double-clicking on close box in a window's title bar doesn't close the window
Xilinx Answer #832 : Hardware Debugger 6.0.1: Once a signal or group is selected in a graphical waveform, it can't be unselected
Xilinx Answer #831 : Hardware Debugger 6.0.1: Printing graphical waveform using Landscape orientation does not rotate waveform.
Xilinx Answer #830 : Hardware Debugger 6.0.1: Help will be disabled if the help file is located on a network drive.
Xilinx Answer #829 : Hardware Debugger 6.0.1: A group cannot be modified using the Signal Groups dialog.
Xilinx Answer #828 : Hardware Debugger 6.0.1: Nothing can be selected when viewing waveforms textually.
Xilinx Answer #827 : Hardware Debugger 6.0.1: A group cannot be deleted from the Signal Groups dialog.
Xilinx Answer #826 : Hardware Debugger 6.0.1: The Cable command Logic Level of Pins is not a continuous probe.
Xilinx Answer #825 : Hardware Debugger 6.0.1: The Console becomes jumbled when it made too small.
Xilinx Answer #824 : Hardware Debugger 6.0.1: Groups w/ many signals may not be displayed properly in graphical waveform windows
Xilinx Answer #823 : Hardware Debugger 6.0.1: Groups cannot be used to create other groups.
Xilinx Answer #796 : Hardware Debugger 6.0.1: Xchecker Cable Can't Be Detected or Readback Only Works Once
Xilinx Answer #771 : Hardware Debugger: Crosshair cursor is invisible on a black background
Xilinx Answer #770 : Hardware Debugger: Only one signal can be selected at a time in a waveform window
Xilinx Answer #654 : Hardware Debugger: Error states a file cannot be opened when it is actually corrupted